Manual Makita UH522D (page 7 of 64) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish)

600304

Zoom out

Zoom in

1/64

restriction if they are undergoing training under the

supervision of an expert.

7. Use the hedge trimmer only if you are in good physical

condition. If you are tired, your attention will be

reduced. Be especially careful at the end of a working

day. Perform all work calmly and carefully. The user is

responsible for all damages to third parties.

8. Never use the trimmer when under the influence of

alcohol, drugs or medication.

9. Work gloves of stout leather are part of the basic

equipment of the hedge trimmer and must always be

worn when working with it. Also wear sturdy shoes

with anti-skid soles.

10. Before starting work check to make sure that the

trimmer is in good and safe working order. Ensure

guards are fitted properly. The hedge trimmer must

not be used unless fully assembled.

11. Make sure you have a secure footing before starting

operation.

12. Hold the tool firmly when using the tool.

13. Do not operate the tool at no-load unnecessarily.

14. Immediately switch off the motor and remove the

battery cartridge if the cutter should come into contact

with a fence or other hard object. Check the cutter for

damage, and if damaged repair immediately.

15. Before checking the cutter, taking care of faults, or

removing material caught in the cutter, always switch

off the trimmer and remove the battery cartridge.

16. Switch off the trimmer and remove the battery

cartridge before doing any maintenance work.

17. When moving the hedge trimmer to another location,

including during work, always remove the battery

cartridge and put the blade cover on the cutter blades.

Never carry or transport the trimmer with the cutter

running. Never grasp the cutter with your hands.

18. Clean the hedge trimmer and especially the cutter

after use, and before putting the trimmer into storage

for extended periods. Lightly oil the cutter and put on

the cover. The cover supplied with the unit can be

hung on the wall, providing a safe and practical way to

store the hedge trimmer.

19. Store the hedge trimmer with the cover on, in a dry

room. Keep it out of reach of children. Never store the

trimmer outdoors.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity with product (gained

from repeated use) replace strict adherence to safety

rules for the subject product. MISUSE or failure to

follow the safety rules stated in this instruction

manual may cause serious personal injury.

IMPORTANT SAFETY

INSTRUCTIONS ENC009-2

FOR BATTERY CARTRIDGE

1. Before using battery cartridge, read all

instructions and cautionary markings on (1)

battery charger, (2) battery, and (3) product using

battery.

2. Do not disassemble battery cartridge.

3. If operating time has become excessively shorter,

stop operating immediately. It may result in a risk

of overheating, possible burns and even an

explosion.

4. If electrolyte gets into your eyes, rinse them out

with clear water and seek medical attention right

away. It may result in loss of your eyesight.

5. Do not short the battery cartridge:

(1) Do not touch the terminals with any

conductive material.

(2) Avoid storing battery cartridge in a container

with other metal objects such as nails, coins,

etc.

(3) Do not expose battery cartridge to water or

rain.

A battery short can cause a large current flow,

overheating, possible burns and even a

breakdown.

6. Do not store the tool and battery cartridge in

locations where the temperature may reach or

exceed 50°C (122°F).

7. Do not incinerate the battery cartridge even if it is

severely damaged or is completely worn out. The

battery cartridge can explode in a fire.

8. Be careful not to drop or strike battery.

9. Do not use a damaged battery.

10. Follow your local regulations relating to disposal

of battery.

SAVE THESE INSTRUCTIONS.

Tips for maintaining maximum battery life

1. Charge the battery cartridge before completely

discharged.

Always stop tool operation and charge the battery

cartridge when you notice less tool power.

2. Never recharge a fully charged battery cartridge.

Overcharging shortens the battery service life.

3. Charge the battery cartridge with room

temperature at 10°C - 40°C (50°F - 104°F). Let a hot

battery cartridge cool down before charging it.

FUNCTIONAL DESCRIPTION

CAUTION:

• Always be sure that the tool is switched off and the

battery cartridge is removed before adjusting or

checking function on the tool.

Installing or removing battery cartridge

(Fig. 1)

CAUTION:

• Always switch off the tool before installing or removing

of the battery cartridge.

• Hold the tool and the battery cartridge firmly when

installing or removing battery cartridge. Failure to

hold the tool and the battery cartridge firmly may cause

them to slip off your hands and result in damage to the

tool and battery cartridge and a personal injury.

To remove the battery cartridge, slide it from the tool while

sliding the button on the front of the cartridge.

To install the battery cartridge, align the tongue on the

battery cartridge with the groove in the housing and slip it

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita UH522D in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 2,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita UH522D Manual

Product: