Manual Makita UH201D (page 13 of 108) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish)

690688

Zoom out

Zoom in

1/108

13 ENGLISH

9. Work gloves of stout leather are part of the

basic equipment of the hedge trimmer and

must always be worn when working with it.

Also wear sturdy shoes with anti-skid soles.

10. Before starting work check to make sure

that the trimmer is in good and safe working

order. Ensure guards are tted properly. The

hedge trimmer must not be used unless fully

assembled.

11. Make sure you have a secure footing before

starting operation.

12. Hold the tool rmly when using the tool.

13. Do not operate the tool at no-load

unnecessarily.

14. Immediately switch off the motor and remove

the battery cartridge if the cutter should come

into contact with a fence or other hard object.

Check the cutter for damage, and if damaged

repair immediately.

15. Before checking the cutter, taking care of

faults, or removing material caught in the cut-

ter, always switch off the trimmer and remove

the battery cartridge.

16. Switch off the trimmer and remove the battery

cartridge before doing any maintenance work.

17. When moving the hedge trimmer to another

location, including during work, always

remove the battery cartridge and put the blade

cover on the cutter blades. Never carry or

transport the trimmer with the cutter running.

Never grasp the cutter with your hands.

18. Clean the hedge trimmer and especially the

cutter after use, and before putting the trimmer

into storage for extended periods. Lightly oil

the cutter and put on the cover.Thecoversup-

pliedwiththeunitcanbehungonthewall,pro-

vidingasafeandpracticalwaytostorethehedge

trimmer.

19. Store the hedge trimmer with the cover on, in

a dry room. Keep it out of reach of children.

Never store the trimmer outdoors.

SAVE THESE INSTRUCTIONS.

WARNING: DO NOT let comfort or familiarity

with product (gained from repeated use) replace

strict adherence to safety rules for the subject

product. MISUSE or failure to follow the safety

rules stated in this instruction manual may cause

serious personal injury.

Important safety instructions for

battery cartridge

1. Before using battery cartridge, read all instruc-

tions and cautionary markings on (1) battery

charger, (2) battery, and (3) product using

battery.

2. Do not disassemble battery cartridge.

3. If operating time has become excessively

shorter, stop operating immediately. It may

result in a risk of overheating, possible burns

and even an explosion.

4. If electrolyte gets into your eyes, rinse them

out with clear water and seek medical atten-

tion right away. It may result in loss of your

eyesight.

5. Do not short the battery cartridge:

(1) Do not touch the terminals with any con-

ductive material.

(2) Avoid storing battery cartridge in a con-

tainer with other metal objects such as

nails, coins, etc.

(3) Do not expose battery cartridge to water

or rain.

A battery short can cause a large current

ow, overheating, possible burns and even a

breakdown.

6. Do not store the tool and battery cartridge in

locations where the temperature may reach or

exceed 50 °C (122 °F).

7. Do not incinerate the battery cartridge even if

it is severely damaged or is completely worn

out. The battery cartridge can explode in a re.

8. Be careful not to drop or strike battery.

9. Do not use a damaged battery.

10. The contained lithium-ion batteries are subject

to the Dangerous Goods Legislation require-

ments.

Forcommercialtransportse.g.bythirdparties,

forwardingagents,specialrequirementonpack-

agingandlabelingmustbeobserved.

Forpreparationoftheitembeingshipped,consult-

inganexpertforhazardousmaterialisrequired.

Pleasealsoobservepossiblymoredetailed

national regulations.

Tapeormaskoffopencontactsandpackupthe

batteryinsuchamannerthatitcannotmove

around in the packaging.

11. Follow your local regulations relating to dis-

posal of battery.

SAVE THESE INSTRUCTIONS.

CAUTION: Only use genuine Makita batteries.

Useofnon-genuineMakitabatteries,orbatteriesthat

havebeenaltered,mayresultinthebatterybursting

causingres,personalinjuryanddamage.Itwill

alsovoidtheMakitawarrantyfortheMakitatooland

charger.

Tips for maintaining maximum

battery life

1. Charge the battery cartridge before completely

discharged. Always stop tool operation and

charge the battery cartridge when you notice

less tool power.

2. Never recharge a fully charged battery car-

tridge. Overcharging shortens the battery

service life.

3. Charge the battery cartridge with room tem-

perature at 10 °C - 40 °C (50 °F - 104 °F). Let

a hot battery cartridge cool down before

charging it.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita UH201D in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 16,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita UH201D Manual

Product: