598775

Makita UH 4830 Manual

7
Zoom out
Zoom in
Previous page
1/44
Next page
7
STARTING
1
2
A
- Hook the extension cord (A/1) in the strain reliever (A/2).
3
B
- Connect the mains plug (B/3) with the extension power
cord.
5
4
7
6
C
- Hold the front handle (C/4) with one hand, depressing the
front grip safety (C/5).
- Grasp the rear handle (C/6) with the other hand and start
the trimmer with the rear handle grip safety (C/7).
Caution: The trimmer will start immediately!
Note: The hedge trimmer will start only when both grip safeties
(C/5 and C/7) are depressed.
Caution: If the hedge trimmer starts after acuating only
one of the switches, do
not work with the trimmer! Take the
trimmer to a MAKITA service center.
To switch off: Release one or both grip safeties. The trimmer
will stop immediately.
Checking the cutter brake
Check the cutter brake each time before starting work!
- Start the trimmer as described above.
- Grasp the front handle
firmly with one hand. Hold the rear
handle with the other hand.
- Depress and then release the rear handle grip safety (C/7).
The cutter should stop instantly.
Important: If the cutter does not stop immediately
during this test, do
not work with the trimmer! Take the
trimmer to a MAKITA service center.
MAINTENANCE
To ensure a long servicelife and to prevent any damage the
maintenance work described in the following must be performed
regularly. The product guarantee will be automatically
invalidated if this maintenance is not carried out regularly and
according to the instructions.
Caution:
Always disconnect the power cord before doing any work
on the hedge trimmer! Always wear protective gloves!
Cleaning and care of the cutter
Caution: Take special care when cleaning and maintaining the
cutter (injury hazard).
Check the cutter regularly for damage, and clean it with a
suitable brush or cloth.
If cutting performance should become unsatisfactory after
extensive use, contact a service center.
Periodic care and maintenance instructions
Before every use
• Check the entire hedge trimmer for cracks and breakage.
If there is any damage, immediately have the trimmer
repaired by a qualified service technician.
• Check the functioning of the on/off switches.
• The ventilation slots must be unobstructed.
• Check the power cord. If there is any damage, have it
replaced at a qualified service center.
After every use
• Clean the entire trimmer.
• Clean and lightly oil the cutter.
Storage
• Store the entire trimmer in a safe place in a dry room.
Trouble shooting
The motor will
not run:
- No power supply, power cord defective, check fuse.
The motor
runs, but the cutter doesn´t move: Take the trimmer
to a MAKITA service center.
STOP
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita UH 4830 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita UH 4830 in the language / languages: English, German, Dutch, Danish, French, Spanish as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info