Manual Makita UH 4520 (page 4 of 44) (English, German, Dutch, Danish, French, Spanish)

598778

Zoom out

Zoom in

1/44

- NEVER affix the grip safeties in the down position!

- Operate the hedge trimmer only in the manner prescribed

by the instruction manual.

- Switch off the hedge trimmer immediately if you notice any

change in its behaviour.

- Immediately unplug the mains plug if the power cord should

become damaged or severed.

- Immediately switch off the motor and unplug the mains plug

if the cutter should come into contact with a fence or other

hard object. Check the cutter for damage.

- Before checking the cutter, taking care of faults, or

removing material caught in the cutter, always switch

off the trimmer and unplug the mains plug.

- Before taking breaks and before leaving the hedge trimmer

unattended, always switch it off and unplug the mains plug.

Place the trimmer in such a way that it cannot endanger

anyone.

Extension power cord

- Use only splash-proof extension cords that are approved

for outdoor use and marked as such.

- When selecting an extension cord, give preference to cords

in fluorescent or eye-catching colours.

- The hedge trimmer is protectively insulated in accordance

with VDE (German Electricians´ Association) Standard

0740 Class II, and can therefore be connected to plug

sockets without ground contact.

- Always work in such a way that the extension power cord

is behind you!

- Always start near the power source and work away from it.

This ensures that the extension cord stays behind the work

area.

- The trimmer power cord must likewise always be behind

the operator. Make sure that it does not get caught, or

comes into contact with sharp objects. Route the cord in

such a way that no persons can be endangered.

Important: Work especially carefully when the extension cord

has to be routed over the hedge!

- Do not use any extension cord with a line cross-section of

less than 3 x 1.5 mm

. When using a reel, make sure that

the cord is completely unrolled. The cord length must not

exceed 30 m / 100 ft!

Transportation and storage

- When moving the hedge trimmer to another

location, including during work, always un-

plug the mains plug.

- Never carry or transport the trimmer with the cutter

running!

- Never grasp the cutter with your hands!

- When transporting the hedge trimmer for more

than short distances, always put on the sheath

supplied with the unit.

- Carry the trimmer

only by the front handle. The

cutter should be pointing backwards.

- When carrying the hedge trimmer in a vehicle, make sure

it is in a secure position. It should be transported only in the

trunk or in a transport area separate from the driver.

- Store the hedge trimmer with the sheath on, in a dry room.

Keep it out of reach of children. Never store the trimmer

outdoors.

- Clean the hedge trimmer and especially the cutter after

use, and before putting the trimmer into storage for extend-

ed periods. Lightly oil the cutter and put on the sheath. The

sheath supplied with the unit can be hung on the wall,

providing a safe and practical way to store the hedge

trimmer.

Maintenance

- Switch off the trimmer and disconnect and

secure the mains plug before doing any

maintenance work.

- Make especially sure the cutter is undamaged and in good

condition.

- Regularly inspect the power cord for damage to the insula-

tion. If the power cord is damaged, disconnect the mains

plug.

- Regularly clean the trimmer.

- If the plastic housing is damaged, have the unit repaired by

a qualified service technician immediately. Shock hazard!

Danger of injury!

Follow the accident-prevention instructions and recom-

mendations of your trade association or insurer.

Do not make any modifications to the hedge trimmer.

Doing so will only endanger your safety.

Perform only the maintenance and repair works described

in the instruction manual. All other work must be carried out

by MAKITA Service.

Use only original MAKITA spare parts and accessories.

Using other than original MAKITA parts or accessories

brings a high risk of accidents. We cannot accept any

responsibility for accidents and damage resulting from non-

MAKITA parts and accesories which have not been ap-

proved.

First aid

For the event of a possible accident, please make sure that a

first aid kit is always immediately available close by. Immedi-

ately replace any items used from the first aid box.

When calling for help, give the following information:

- Place of the accident

- What happened

- Number of injured

- Kind of injuries

- Your name!

NOTE

Individuals with poor circulation who are exposed to excessive

vibration may experience injury to blood vessels or the nervous

system.

Vibration may cause the following symptoms to occur in the

fingers, hands or wrists: ”Falling asleep” (numbness), tingling,

pain, stabbing sensation, alteration of skin colour or of the skin.

If any of these symptoms occur, see a physician!

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita UH 4520 in the language / languages: English, German, Dutch, Danish, French, Spanish as an attachment in your email.

The manual is 1,52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita UH 4520 Manual

Product: