448682
9
Zoom out
Zoom in
Previous page
1/88
Next page
9
ENGLISH (Original Instructions)
Explanation of general view
SPECIFICATIONS
Due to our continuing programme of research and development, the specifications herein are subject to change without
notice.
Specifications may differ from country to country.
Weight according to EPTA-Procedure 01/2003
Symbols
END011-3
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
............... Take particular care and attention.
... Read instruction manual.
............... Do not expose to rain.
............... Danger; be aware of thrown objects.
............... Keep bystanders away.
............... Cutting means continues to run after the
motor is switched off.
........ Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and waste
batteries and accumulators and their
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
Intended use
ENE014-1
The tool is intended for trimming hedges.
General Power Tool Safety
Warnings GEA010-1
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
CORDLESS HEDGE TRIMMER
SAFETY WARNINGS
GEB062-2
1. Hold the power tool by insulated gripping surfaces
only, because the cutter blade may contact hidden
wiring. Cutter blades contacting a “live” wire may
1. Battery cartridge
2. Button
3. Lock-off button
4. Switch trigger
5. Indication lamp
6. Trimming direction
7. Tilt the blades
8. Hedge surface to be trimmed
9. String
10. Clamping nuts
11. Chip receiver
12. Screws on the shear blades
13. Blade cover to be always installed
before installing the chip receiver
14. Brush
15. Machine oil
16. Blade cover
17. Undercover
18. Locking lever
19. Press
20. Turn
21. Screws
22. Crank
23. Shear blades
24. Basic alignment line on the tool
housing
25. Pins
26. Apply grease.
27. Recessed part of crank
28. Oval holes that are overlapped
29. Hole in the base plate of shear
blades
30. Base plate
31. Bent part of the base plate of
shear blades
32. Groove in the undercover
33. Hook hole
34. Grass shear blade
35. Grass shear blade cover
36. Storage case
37. Base frame
38. Groove
39. Change lever
40. Protrusion on base frame
Model UH200D
Blade length 200 mm
Strokes per minute (min
-1
) 1,250
Overall length 460 mm
Net weight 1.2 kg
Rated voltage D.C. 10.8 V
Cd
Ni-MH
Li-ion
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita UH 200D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita UH 200D in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info