79158
22
Zoom out
Zoom in
Previous page
1/136
Next page
22
Trouble shooting
Malfunction System Observation Cause
Chain saw does not work total electric motor does not
function
no power supply,
cable defective
chain brake actuated
Mains fuse blown
insufficient performance Carbon brushes low pulling power Carbon brushes worn
down
no chain lubrication Oil tank, oil pump no oil on the saw chain oil tank empty,
oil guide groove dirty
Chain brake Brake Saw chain does not stop
instantly
Brake band worn down
Run-out brake Brake Saw chain continues to run Carbon brushes worn
down
Instructions for periodic maintenance
To ensure long life, prevent damage and ensure the full functioning of the safety features the following maintenance
must be performed regularly. Guarantee claims can be recognized only if this work is performed regularly and properly.
Failure to perform the prescribed maintenance work can lead to accidents!
The user of the electric chain saw is not allowed to perform maintenance works which are not described in the
instruction manual. All other works must be carried out by a MAKITA service centre.
General work Electric chain saw Regularly clean the outside.
Plastic case Check for cracks and ruptures. In case of damage have it
immediately repaired at a service centre.
Saw chain Resharpen regularly.
Replace in time.
Guide bar Turn over after a certain period of time so that the bearing
surfaces are uniformly worn.
Replace in time.
Sprocket Have it replaced in time at a service centre.
Chain brake Have it inspected regularly at a service centre.
Run-out brake Have it inspected regularly at a service centre.
Each time before putting
the saw into operation
Saw chain Check for damage and sharpness.
Check the chain tension.
Guide bar Check for damage, and remove burrs if necessary.
Chain lubrication Functional check.
Chain brake Functional check.
Run-out brake Functional check.
Power switch Functional check.
Power supply cable In case of damage have it replaced at a service centre.
Oil tank cap Check for tightness.
After each shutdown Guide bar Clean the oil inlet bore.
Chain carrier Clean, especially the oil guide groove.
Storage Chain oil tank Empty.
Saw chain/guide bar Demount, clean and lubricate slightly.
Clean the guide groove of the guide bar.
Electric chain saw Store safely in a dry place. After a long storage time, have
the electric chain saw checked at a service centre (residual
oil can become resinic and the valve of the oil pump
clogged).
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita UC 4030 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita UC 4030 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish, Norwegian as an attachment in your email.

The manual is 5,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info