79158
11
Zoom out
Zoom in
Previous page
1/136
Next page
11
Symbols
You will notice the following symbols on the chain saw
and in the instruction manual:
Thank you for your trust in our product
We congratulate you on your new MAKITA electric
chain saw. We are convinced that you will be satisfied
with this modern machine.
MAKITA electric chain saws are characterized by their
robust, high-efficiency motors and high chain velocities
which allow an excellent cutting efficiency. They
are equipped with numerous state-of-the-art safety
devices, are light, handy and can be put into operation
immediately wherever electric power is provided.
In order to guarantee the optimal function and
performance of your electric chain saw and to ensure
your personal safety we would request you to perform
the following:
Read this instruction manual carefully before
putting the electric chain saw into operation
for the first time and strictly observe the safety
regulations. Failure to do so can result in serious
injury to the operator and/or bystanders.
Read instruction manual and
follow the warnings- and safety
precautions!
Particular care and attention!
Wear protective helmet, eye and
ear protection!
Pull out the power supply plug!
Pull out the power supply plug if
the cable is damaged!
Chain brake released
Chain brake actuated
Kickback!
Forbidden!
..... mm
Maximum permissible cut length
Wear protective gloves!
Protect against moisture!
Direction of chain travel
Double protective insulation
Saw chain oil
First aid
Recycling
CE-Marking
Be a good steward of the
environment! Do not dispose of
electrical appliances with the
household trash!
If the saw is no longer operable
or repairable, ask the appropriate
waste disposal authority about the
proper means of disposal.
In order to preclude any hazard
to other persons from a defective
electrical appliance, cut off the
power cord next to the housing.
CAREFUL! Before cutting off
the power cord, pull the plug.
Otherwise you can be exposed
to a life-threatening shock!
ENGLISH
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita UC 4030 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita UC 4030 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish, Norwegian as an attachment in your email.

The manual is 5,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info