598818

Makita UB0800 Manual

9
Zoom out
Zoom in
Previous page
1/19
Next page
9
IMPORTANT:
While in mulching mode (optional accessory) the blower
MUST be in high speed position.
HOLDING THE TOOL
Before operating the unit, stand in the operating position.
Check for the following:
Wear proper clothing, such as boots, safety glasses or
goggles, ear/hearing protection, gloves, long pants and
a long sleeve shirt.
WARNING:

glasses that comply with EN 166 or ANSI Z87.1 at all
times when operating this unit. Wear a face mask or
dust mask in dusty locations.
WARNING:
        
unit, make sure the blower tube or the mulcher tubes
and the bag are in place before operating the unit.
OPERATING TIPS (Fig. 7)
Assure the unit is not directed at anybody or any loose
debris before starting the unit.
Verify that the unit is in good working condition. Make
sure the tubes and guards are in place and secure.
Always hold the unit with both hands when operating.
    
grips.
To reduce the risk of hearing loss associated with sound
level(s), hearing protection is required.
Use the shoulder strap when using unit as a mulcher.
Be sure the bag is installed properly and zipped closed
(when used as a mulcher).
Operate power equipment only at reasonable hours
- not early in the morning or late at night when people
might be disturbed. Comply with times listed in local
ordinances. Usual recommendations are 9:00 am to
5:00 pm, Monday through Saturday.
To reduce noise levels, limit the number of pieces of
equipment used at any one time.
To reduce noise levels, operate the tool at low speed
if possible.
Use rakes and brooms to loosen debris before
blowing.
In dusty conditions, slightly dampen surfaces.
Conserve water by using power blowers instead of
hoses for many lawn and garden applications, including
areas such as gutters, screens, patios, grills, porches,
and gardens.
Watch out for children, pets, open windows or freshly
washed cars, and blow debris safely away.
Clean up after using blowers and other equipment.
Dispose of debris appropriately.
NOTE:
Please ensure that the Mulching Gate is completely
closed and locked.
AIR VENTS
Never cover air vents. Keep them free from obstructions
and debris. They must always remain clear for proper
motor cooling.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
WARNING:
        
       
chains, ties, etc., that could get drawn into the air vents.
To make sure long hair does not get drawn into the air
vents, tie back long hair.
OPERATING AS A BLOWER


advance the unit, keeping the accumulated pile of debris
in front of you. Most dry blowing operations are better
suited to low speeds, rather than high. High speed blow-
ing is a better way to move heavier items like large debris
or gravel.
OPERATING AS A MULCHER (optional
accessory)

and use a sweeping action to collect light debris. The

and twigs will be mulched as they pass through the fan
housing. For longer bag life and increased performance,
empty the bag often.
CLEARING A BLOCKED TUBE / IMPELLER
WARNING:

and unplugged before clearing the impeller.
WARNING:

protect yourself from the impeller blades or other sharp

Slide the Power/Speed slide switch to the OFF position,
and wait until the unit comes to a complete stop.
Unplug the unit.
Remove the blower tube or mulcher tubes and the
bag.
Carefully remove material blocking the tube or impeller.
Inspect the blades to ensure no damage has occurred.
Rotate the impeller blades by hand to ensure the block-
age is completely cleared.
Reinstall the blower tube or mulcher tubes and the
bag.
Plug the unit back into the power supply.
MAINTENANCE
WARNING:
Never use water for cleaning your product, use only a
dry cloth. Never use gasoline, benzine, thinner, alcohol
or the like. Discoloration, deformation or cracks may
result.
Switch off and disconnect from the mains power supply
before cleaning or checking your product.
Always empty the collection bag.
Always store the product in a dry place ensuring the
cable is not likely to be damaged.
•
•
•
•
•
•
•
•
•
•
•
•
•
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita UB0800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita UB0800 in the language / languages: All languages as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info