Manual Makita TW161D (page 4 of 72) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish)

691726

Zoom out

Zoom in

1/72

4 ENGLISH

ENGLISH (Original instructions)

SPECIFICATIONS

Model: TW161D

Fastening capacities Standard bolt M8 - M16

High tensile bolt M6 - M12

Square drive 12.7 mm

No load speed Hard impact mode 0 - 2,400 min

-1

Soft impact mode 0 - 1,300 min

-1

Impacts per minute Hard impact mode 0 - 3,600 min

-1

Soft impact mode 0 - 2,000 min

-1

Overall length 150 mm

Rated voltage D.C. 10.8 V - 12 V max

Net weight 1.0 - 1.2 kg

• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange

without notice.

• Specicationsmaydifferfromcountrytocountry.

• Theweightmaydifferdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-

est combination, according to EPTA-Procedure 01/2014, are shown in the table.

Applicable battery cartridge and charger

Batterycartridge BL1015 / BL1016 / BL1020B / BL1021B / BL1040B / BL1041B

Charger DC10SA / DC10SB / DC10WC / DC10WD / DC18RE

• Someofthebatterycartridgesandchargerslistedabovemaynotbeavailabledependingonyourregionof

residence.

WARNING: Only use the battery cartridges and chargers listed above.Useofanyotherbatterycartridges

andchargersmaycauseinjuryand/orre.

Intended use

The tool is intended for fastening bolts and nuts.

Noise

ThetypicalA-weightednoiseleveldeterminedaccord-

ing to EN62841-2-2:

Soundpressurelevel(L

):93dB(A)

Soundpowerlevel(L

):104dB(A)

Uncertainty(K):3dB(A)

NOTE:Thedeclarednoiseemissionvalue(s)has

been measured in accordance with a standard test

methodandmaybeusedforcomparingonetoolwith

another.

NOTE:Thedeclarednoiseemissionvalue(s)

mayalsobeusedinapreliminaryassessmentof

exposure.

WARNING: Wear ear protection.

WARNING:

The noise emission during actual

use of the power tool can differ from the declared val-

ue(s) depending on the ways in which the tool is used

especially what kind of workpiece is processed.

WARNING:

Be sure to identify safety measures

to protect the operator that are based on an estima-

tion of exposure in the actual conditions of use (tak-

ing account of all parts of the operating cycle such

as the times when the tool is switched off and when

it is running idle in addition to the trigger time).

Vibration

Thevibrationtotalvalue(tri-axialvectorsum)deter-

mined according to EN62841-2-2:

Work mode: impact tightening of fasteners of the maxi-

mumcapacityofthetool

Vibrationemission(a

):8.0m/s

Uncertainty(K):1.5m/s

NOTE:Thedeclaredvibrationtotalvalue(s)hasbeen

measured in accordance with a standard test method

andmaybeusedforcomparingonetoolwithanother.

NOTE:Thedeclaredvibrationtotalvalue(s)mayalso

beusedinapreliminaryassessmentofexposure.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita TW161D in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 13,46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita TW161D Manual

Product: