598926
8
Zoom out
Zoom in
Previous page
1/18
Next page
8 ENGLISH
NOTE: Use the proper bit for the head of the screw/
bolt that you wish to use.
NOTE: When fastening M8 or smaller screw, choose
КăЩrШЩОrăТЦЩКМtăПШrМОăКЧНăМКrОПuХХвăКНУustăЩrОssurОăШЧă
the switch trigger so that the screw is not damaged.
NOTE: Hold the tool pointed straight at the screw.
NOTE: If the impact force is too strong or you tighten
tСОăsМrОаăПШrăКătТЦОăХШЧРОrătСКЧăsСШаЧăТЧătСОăiРurОs,ă
the screw or the point of the driver bit may be over-
stressed, stripped, damaged, etc. Before starting your
УШЛ,ăКХаКвsăЩОrПШrЦăКătОstăШЩОrКtТШЧătШăНОtОrЦТЧОătСОă
proper fastening time for your screw.
The fastening torque is affected by a wide variety of
factors including the following. After fastening, always
check the torque with a torque wrench.
1. When the battery cartridge is discharged almost
completely, voltage will drop and the fastening
torque will be reduced.
2. Driver bit or socket bit
Failure to use the correct size driver bit or socket
bit will cause a reduction in the fastening torque.
3. Bolt
•ă EЯОЧătСШuРСătСОătШrquОăМШОПiМТОЧtăКЧНătСОă
class of bolt are the same, the proper fasten-
ing torque will differ according to the diame-
ter of bolt.
Even though the diameters of bolts are the
same, the proper fastening torque will differ
КММШrНТЧРătШătСОătШrquОăМШОПiМТОЧt,ătСОăМХКssă
of bolt and the bolt length.
4. The manner of holding the tool or the material
of driving position to be fastened will affect the
torque.
5. Operating the tool at low speed will cause a reduc-
tion in the fastening torque.
UsТЧРăСШХstОr
Optional accessory
CAUTION: АСОЧăusТЧРătСОăСШХstОrĽărОЦШЯОăКă
НrТЯОrăЛТt/НrТХХăЛТtăПrШЦătСОătШШХ.
CAUTION: TurЧăШППătСОătШШХăКЧНăаКТtăuЧtТХăТtă
МШЦОsătШăКăМШЦpХОtОăstШpăЛОПШrОăpХКМТЧРăТtăТЧătСОă
holster.
Be sure to close the holster securely with the
СШХstОrăЛuttШЧăsШătСКtăТtăСШХНsătСОătШШХăirЦХв.
1. Thread a waist belt or similar through holster
holder.
Fig.11: 1. Holster holder 2. Waist belt
2. Put the tool in the holster and lock it with the hol-
ster button.
Fig.12
Fig.13
You can keep two driver bits at the front of the holster.
MAINTENANCE
CAUTION: Always be sure that the tool is
sаТtМСОНăШППăКЧНătСОăЛКttОrвăМКrtrТНРОăТsărОЦШЯОНă
ЛОПШrОăКttОЦptТЧРătШăpОrПШrЦăТЧspОМtТШЧăШră
ЦКТЧtОЧКЧМО.
NOTICE: ІОЯОrăusОăРКsШХТЧОĽăЛОЧгТЧОĽătСТЧЧОrĽă
КХМШСШХăШrătСОăХТkО.ăDТsМШХШrКtТШЧĽăНОПШrЦКtТШЧăШră
cracks may result.
To maintain product SAFETY and RELIABILITY,
rОЩКТrs,ăКЧвăШtСОrăЦКТЧtОЧКЧМОăШrăКНУustЦОЧtăsСШuХНă
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
OPTIONAL
ACCESSORIES
CAUTION: TСОsОăКММОssШrТОsăШrăКttКМСЦОЧtsă
КrОărОМШЦЦОЧНОНăПШrăusОăаТtСăвШurăMКkТtКătШШХă
spОМТiОНăТЧătСТsăЦКЧuКХ. The use of any other
accessories or attachments might present a risk of
ТЧУurвătШăЩОrsШЧs.ăЇЧХвăusОăКММОssШrвăШrăКttКМСЦОЧtă
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
Driver bits
Socket bits
Bit piece
• Holster
• Hook
Plastic carrying case
Makita genuine battery and charger
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita TD110D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita TD110D in the language / languages: English, German, Polish as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Makita TD110D

Makita TD110D User Manual - English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info