598943
16
Zoom out
Zoom in
Previous page
1/22
Next page
Makita SKR200
16
EN
Checking the accuracy
Level accuracy
30m (100ft)
1
x
1
1
Place laser on leveled tripod
approximately 30 m from a
wall. Align the X-axis so that it
is square to the wall.
Switch on the laser. Use
automatic mode and allow the
laser to self-level. Mark the
position of the beam with the
receiver (Position 1).
x
2
180°
30m (100ft)
2
2
Rotate the laser 180°,
allow it to self level
and mark the
opposite side of the
first axis (Position 2).
90°
y
1
30m (100ft)
3
3
Align the Y-axis by rotating
the laser 90° so that this axis
is square to the wall. Allow the
laser to self-level completely,
and then mark the position of
the beam (Position 3).
180°
y
2
30m (100ft)
4
4
Rotate the laser
180°, allow it to self
level and mark the
position of the beam
(Position 4).
The laser is within its
accuracy
specification if the
four marks are within
±3mm (± 1/8") from
the center.
Vertical accuracy
10m (30ft)
1
Place laser in lay down position on a flat, level
surface, approximately 10 m from a wall.
Hang a plumb line on the wall. Switch on the
laser. Use automatic mode and allow the laser
to self-level. Align the vertical beam to the
plumb line. Use scan operation to have best
visibility.
If the vertical beam is not plumb, adjustment is
necessary.
i
Should the laser be
outside of the
specified
tolerance, please
contact a local
dealer.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita SKR200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita SKR200 in the language / languages: English as an attachment in your email.

The manual is 6,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Makita SKR200

Makita SKR200 User Manual - German - 21 pages

Makita SKR200 User Manual - Dutch - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info