Manual Makita PTR2500 (page 12 of 98) (English, German, Dutch, French, Italian, Spanish)

598974

Zoom out

Zoom in

1/98

STOPPING THE ENGINE

1. Release the throttle lever.

2. Push the I-O switch to the "O" position (5) to stop the engine.

The cutter blades of the pole hedge trimmer should not move when the throttle

lever is released.

- The correct idling speed is 3000 min

-1

. If necessary, adjust the idling speed using

the idling adjustment screw (reduce revs until the cutter blades do not move

anymore).

• Turn screw clockwise: Idling speed increases

• Turn screw counter-clockwise: Idling speed decreases.

Allow an adequate difference between the idling rate and the rate at which the

clutch engages (reduce idling speed further if necessary). Should the cutter

blades still move in spite of accurate idling speed settings, consult your

nearest authorized service agent.

• The clutch should engage at a minimum rate of 4000 min

-1

• Check that the STOP switch, the lock-off lever and the throttle lever are all

functioning properly.

CHECKING AND ADJUSTING THE IDLING SPEED

(5)

slow High

Idling adjustment screw

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita PTR2500 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita PTR2500 Manual

Product: