691774
9
Zoom out
Zoom in
Previous page
1/64
Next page
9 ENGLISH
Driving pin nails
WARNING: Continue to place the contact
element rmly on the material until the pin nail is
driven completely.Unintentionalringmaycause
personalinjuries.
1. Release the trigger lock.
2. Placeatthecontactelementonthematerial.
3. Pulltheswitchtriggerfullytodriveapinnail.
4. Todrivethenextpinnail,releaseyourngerfrom
the switch trigger once, and then repeat the step 2 and
3above.
►Fig.14: 1.Switchtrigger2. Contact element
You can also drive the pin nails when dragging the
tool to the next area with the contact element pressed
against the material and pulling the switch trigger.
►Fig.15
Iftheheadofthepinnailremainsabovetheworkpiece
surface,drivethepinnailwhileholdingthepinnailer
headrmlyagainsttheworkpiece.
►Fig.16
NOTE:Iftheheadofthepinnailstillremainsabove
the workpiece even you hold the pin nail head,
thematerialmaynotbesuitableforthepinnailer.
Continuing to use the pin nailer on such material may
resultinadamagetothedriverofthepinnailerand/
orpinnailerjamming.
Anti dry re mechanism
WARNING: Always make sure that your
ngers are not placed on the switch trigger or
the contact element and the battery cartridge is
removed before loading the pin nailer.
Whenthenumberofremainingpinnailsinthemaga-
zineare0-3pieces,theswitchtriggercannolongerbe
pulled.Atthistime,insertanewstripofpinnailsinthe
magazineandtheswitchtriggercanbepulledagain.
NOTE:Whenringadifferentlengthofpinnails
shortlyaftertheanti-dryringdevicehasactuated,
insertanewstripofpinnailsintothemagazineand
reawayallthepriorpinnailsthathaveremainedon
junkmaterial.
Checking remaining pin nails
Youcanchecktheamountofremainingpinnails
through the sight window.
Theredindicatormovestowardfasteningopeningwith
theamountofremainingpinnailsbecomesmaller.
►Fig.17: 1.Sightwindow2. Indicator
Removing jammed pin nails
WARNING: Always make sure that the battery
cartridge is removed before removing jammed
pin nails.
Takeoutpinnailsthatremaininsidethemagazine.
Remove three screws with the hex wrench that are
securing the driver guide cover.
Takethejammednailsfromthenailguidegroovethat
has appeared.
Whenitisdifculttotakeoutthejammednails,further
remove two screws with the hex wrench that are secur-
ingthecontacttopcover.Thentakethemout.
►Fig.18: 1. Driver guide cover 2.Screw3. Contact
top cover
MAINTENANCE
CAUTION: Always be sure that the tool is
switched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
NOTICE: Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
TomaintainproductSAFETYandRELIABILITY,
repairs,anyothermaintenanceoradjustmentshould
beperformedbyMakitaAuthorizedorFactoryService
Centers,alwaysusingMakitareplacementparts.
OPTIONAL
ACCESSORIES
CAUTION: These accessories or attachments
are recommended for use with your Makita tool
specied in this manual.Theuseofanyother
accessoriesorattachmentsmightpresentariskof
injurytopersons.Onlyuseaccessoryorattachment
foritsstatedpurpose.
Ifyouneedanyassistanceformoredetailsregard-
ingtheseaccessories,askyourlocalMakitaService
Center.
• Pinnails
• Makitagenuinebatteryandcharger
• Safetygoggles
NOTE:Someitemsinthelistmaybeincludedinthe
toolpackageasstandardaccessories.Theymay
differfromcountrytocountry.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita PT354D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita PT354D in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 12,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info