690700

Makita PLM4631N2 Manual

14
Zoom out
Zoom in
Previous page
1/252
Next page
14
4. TECHNICAL DATA
5. ASSEMBLY
5-1 ASSEMBLING THE FOLDING
HANDLE
1. Fix the lower handlebar onto the handle bracket with
bolt, washer and locking knob. (Fig. 5)
2. Lift the two locking levers to connect the upper and
lower handle. (Fig. 6)
3. Push the locking lever closed to lock the handlebars in
the operating position. (Fig. 7)
4. Adjust the tension by turning the lock nut with a
suitable spanner. (Fig. 8)
5. Position the cable over the handle shaft. Clamp it
around the middle of lower handle by the cable clamp
and make sure the cable is fixed around the outside of
the handle. (Fig. 9, Fig. 10) Otherwise the cable may
be pinched by opening/closing the rear cover.
5-2 ADJUSTMENT FOR AN
APPROPRIATE ANGLE
1) Pull the locking lever opening.
2) Rotating the upper handle centered of the angle
adjusting gear for adjusting an appropriate angle into
the scope -15º to 15º (3 position: -15º/0º/15º) as the
Fig. 11 shown.
3) Push the locking lever closed to connect the lower
handle and the upper handle.
5-3 MOUNTING AND DISMOUNTING THE
GRASS CATCHER
1. To fit: Raise the rear cover and hitch the grass catcher
on rear of mower. (Fig. 12, Fig. 13, Fig. 14)
2. To remove: Grasp and lift rear cover, remove grass
catcher.
5-4 STARTER HANDLE
Move the starter handle from the engine to the rope guide.
(Fig. 15)
5-5 HEIGHT OF CUT
Apply outward pressure to disengage lever from rack.
Move lever forward or back to adjust height. (Fig. 16 and
see clause 7-9)
6. FUNCTION
These lawn mowers can be retrofitted from its normal
function, based on the application purpose:
From lawn mower with rear collection to:
1. Mulching mower or as
2. Side-discharge mower.
What is mulching?
When mulching, the grass is cut in one working step, then
finely chopped and returned to the grass strip as natural
fertilizer.
Model PLM4630N2 PLM4631N2 PLM4632N PLM5130N
Engine type
B&S 675EXi Series,
ReadyStart
B&S 675EXi Series,
ReadyStart
B&S 750EX Series,
ReadyStart
B&S 750EX Series,
ReadyStart
Self-propelled No Yes Yes Yes
Engine displacement 163 cm
3
163 cm
3
161 cm
3
161 cm
3
Nominal Power 2.6 kW 2.6 kW 2.5 kW 2.5 kW
Blade width 460 mm 460 mm 460 mm 510 mm
Rated speed 2,800/min 2,800/min 2,800/min 2,800/min
Fuel tank capacity 1.0 L 1.0 L 1.0 L 1.0 L
Oil tank capacity 0.47 L 0.47 L 0.6 L 0.6 L
Grass catcher capacity 60 L 60 L 60 L 65 L
Net weight 30 kg 32.5 kg 35 kg 38 kg
Height adjustment
25-70 mm,
8 adjustment
25-70 mm,
8 adjustment
25-70 mm,
8 adjustment
25-70 mm,
8 adjustment
Model PLM4630N2 PLM4631N2 PLM4632N PLM5130N
Guaranteed Sound Pressure
level at operator’s position
(According to EN ISO 5395-1
Annex F & EN ISO 5395-2, EN
ISO 4871)
84.3 dB (A)
(K=3 dB (A))
84.3 dB (A)
(K=3 dB (A))
83.9 dB (A)
(K=3 dB (A))
85.7 dB (A)
(K=3 dB (A))
Measured Sound Power level
94.0 dB (A)
K=1.80 dB (A)
94.0 dB (A)
K=1.80 dB (A)
94.3 dB (A)
K=1.80 dB (A)
95.9 dB (A)
K=2.16 dB (A)
Guaranteed Sound Power level
(According to 2000/14/EC)
96 dB (A) 96 dB (A) 96 dB (A) 98 dB (A)
Vibration
(According to EN ISO 5395-1
Annex G & EN ISO 5395-2)
5.18 m/s
2
K=1.5 m/s
2
5.18 m/s
2
K=1.5 m/s
2
7.12 m/s
2
K=1.5 m/s
2
6.53 m/s
2
K=1.5 m/s
2
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita PLM4631N2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita PLM4631N2 in the language / languages: All languages as an attachment in your email.

The manual is 4,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info