Manual Makita PLM4631N2 (page 13 of 252) (All languages)

690700

Zoom out

Zoom in

1/252

• Do not start the engine when standing in front of the

discharge chute.

• Do not put hands or feet near or under rotating parts.

Keep clear of the discharge opening at all times.

• Never pick up or carry a lawn mower while the engine

is running.

• Stop the engine and disconnect the spark plug wire,

make sure that all moving parts have come to a

complete stop and, where a key is fitted remove the

key:

- before clearing blockages or unclogging chute;

- before checking, cleaning or working on the lawn

mower;

- after striking a foreign object. Inspect the lawn

mower for damage and make repairs before

restarting and operating the lawn mower;

- if lawn mower starts to vibrate abnormally (check

immediately).

• Stop the engine and disconnect the spark plug wire,

make sure that all moving parts have come to a

complete stop and, where a key is fitted remove the

key:

- whenever you leave the lawn mower;

- before refueling.

• Reduce the throttle setting during engine shut down

and, if the engine is provided with a shut-off valve, turn

the fuel off at the conclusion of mowing.

• Only use the lawn mower for the purpose for which it is

designed, for cutting and collecting grass. Any other

use can be hazardous, causing damage to the

machine.

Maintenance and storage

• Keep all nuts, bolts and screws tight to be sure the

equipment are in safe working condition.

• Never store the equipment with petrol in the tank inside

a building where fumes can reach an open flame or

spark.

• Allow the engine to cool before storing in any

enclosure; Clean and maintain the lawn mower before

storage.

• To reduce the fire hazard, keep the engine, silencer,

battery compartment and petrol storage area free of

grass, leaves, or excessive grease.

• Check the grass catcher frequently for wear or

deterioration.

• Replace worn or damaged parts for safety.

• If the fuel tank has to be drained, this should be done

outdoors.

• Improper maintenance, use of non-conforming

replacement components, or the removal or

modification of safety components can damage the

lawn mower and injure the operators seriously.

• Only use the recommended blades and spare parts by

the manufacturer. The use of non-genuine parts can

damage the machine and injure the operators. Keep

the lawn mower in good working condition.

• If the blade stopping device doesn't work, please

contact service center for help.

Transportation and handling

• Whenever the machine is to be handled, raised,

transported or tilted you must:

- wear strong working gloves;

- grasp the machine at the points that offer a safe grip,

taking account of the weight and its distribution;

- use an appropriate number of people for the weight

of the machine and the characteristics of the vehicle

or the place where it has to be placed or collected.

• During transport, fasten the machine securely with

ropes or chains.

WARNING: Do not touch rotating blade.

WARNING: Refuel in a well ventilated area with

the engine stopped.

3. PARTS DESCRIPTION (Fig. 1,

Fig. 2, Fig. 3, Fig. 4)

Including

A: Spark plug wrench

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita PLM4631N2 in the language / languages: All languages as an attachment in your email.

The manual is 4,86 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita PLM4631N2 Manual

Product: