Manual Makita PLM 4811 (page 91 of 104) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

79172

Zoom out

Zoom in

1/104

MODALITE D’UTILISATION

➊ “Mulching” - Broyage et épandage de l’herbe sur la

pelouse

➋ Tonte et ramassage de l'herbe tondue

➌ Tonte et éjection de l’herbe tondue

CONSIGNES DE SECURITE

A) Généralités

1) Cette feuille d’instructions complète les informations

reportées dans le manuel d’instructions de la machine

et en fait partie intégrante si on utilise le kit “mulching”.

2) L’application du kit “mulching” modifie le système

traditionnel de tonte et l’éventuel ramassage ou éjection

de l’herbe tondue prévu à l’origine sur la machine.

3) L’application du kit et l’utilisation de la machine équi-

pée pour le “mulching” doivent s’effectuer dans le plein

respect des normes de sécurité prévues sur le manuel

d’instructions de la machine et des indications fournies

pour les différentes situations d’utilisation et entretien.

B) Normes d’utilisation

1) Le montage et le démontage du kit doivent toujours

être exécutés avec le moteur arrêté, après avoir enlevé

la clé de démarrage (si prévue), ou après avoir débran-

ché l’embout de la bougie du moteur.

2) Appliquer le kit “mulching” et s’assurer de la fixation

et stabilité correctes des pièces montées.

3) Même avec le kit “mulching” appliqué, il faut tou-

jours travailler avec le bac de ramassage ou le pare-

pierres correctement montés.

4) Toujours éviter de tondre une quantité d’herbe

importante afin d’éviter d’engorger le plateau de coupe

et de surcharger le moteur et les organes de tonte.

Adapter la vitesse d'avancement aux conditions de la

pelouse et à la quantité d'herbe tondue.

INSTRUCTIONS DE MONTAGE ET DEMONTAGE

Montage

Soulever le pare-pierres puis appliquer le bouchon

déflecteur (1) dans la bouche de sortie en le maintenant

légèrement incliné vers le bas. Ensuite, pousser à fond

le bouchon jusqu’à ce que la partie inférieure de la poi-

gnée (2) s’arrête contre la coque.

Démontage

Soulever le pare-pierres et enlever le bouchon déflec-

teur (1).

HOW TO USE

➊ “Mulching” – Chopping and depositing grass on the

lawn

➋ Cutting and collecting grass cuttings

➌ Cutting and ejecting grass cuttings

SAFETY REGULATIONS

A) Introduction

1) This instruction sheet adds to the information con-

tained in the machine instruction manual and becomes

an integral part when the “mulching” accessory is used.

2) The application of the “mulching” accessory modi-

fies the traditional system already fitted on the machine

for mowing, collecting and ejecting grass cuttings.

3) The application of the accessory and the use of the

machine equipped for “mulching” must fully comply

with the safety regulations given in the machine instruc-

tion manual and with the instructions regarding different

situations of use and maintenance.

B) Standards of use

1) Always fit and dismantle the accessory with the

engine off, after removing the ignition key (if supplied),

or after disconnecting the cap from the engine spark

plug.

2) Apply the “mulching” accessory and check that the

fitted parts have been fastened correctly and securely.

3) You always need to work with the grass-catcher or

stone-guard fitted properly even when using the

“mulching” accessory.

4) Always avoid removing a large quantity of grass, to

avoid blocking the cutting deck or overloading the

engine and the cutting parts. Regulate the forward

speed depending on the lawn conditions and the quan-

tity of grass removed.

INSTRUCTIONS FOR ASSEMBLY

AND DISMANTLING

Assembly

Lift the stone-guard and fit the deflector cap (1) in the

outlet, tilting it down slightly. Then push it right down

until the bottom of the grip wedged against the body-

work (2).

Dismantling

Lift the stone-guard and remove the deflector cap (1)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita PLM 4811 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita PLM 4811 Manual

Product: