598963

Makita PF 4001 Manual

10
Zoom out
Zoom in
Previous page
1/28
Next page
10
Before starting
Installation of your submersible pump is:
• fixed with a fixed pipe, or
• fixed with a flexible hose.
Take care
When installing it is necessary to take care that the pump is never fitted
hanging from its delivery pipe, but is always placed in a raised position with
respect to the bottom of the well so that the muddy bottom is not sucked up
with the water.
Never handle or hang the pump by gripping the power supply cable.
In pumps with a floating switch, the latter is adjusted in order to make
immediate starting possibile.
Note
The pump well must have minimum dimensions of 40x40x50 cm. so that the
floating switch can move freely. It is also possible to use round, prefabricated
concrete wells with an inner diameter of approx. 40 cm.
Maintenance instructions
Your canned motor pump is a quality product, free from maintenance. It has
been subjected to rigorous final checks. However, for a long service life and
continuous operation, we recommend constant care and regular checks.
• Before every maintenance job, disconnect the plug from the supply.
• For transportable use the pump should be washed with clear water after
every use.
• For fixed installation it is recommended to check the operation of the floating
switch every 3 months.
• Using a jet of water, get rid of the fibre and spindly particles that may get
deposited in the pump’s cassing.
• Every 3 months remove the mud from the bottom and walls of the well.
• Eliminate the deposits from the floating switch, washing it with fresh water.
• Protect the pump from frost.
CAUTION!
“DRAINAGE”
Special instructions: It is not suitable for pumping: sewage, sandy water.
The pump must never run dry.
The manufacturer’s warranty is null and void in the event of damage to the
pump caused by it running dry.
“VORTEX”
The pump must never run dry.
The manufacturer’s warranty is null and void in the event of damage to the
pump caused by it running dry.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita PF 4001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita PF 4001 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info