Manual Makita N1923B (page 6 of 56) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

448612

Zoom out

Zoom in

1/56

ENGLISH

Explanation of general view

1 Bolt

2 Drum

3 Planer blade

4 Drum cover

5 Adjust plate

6 Blade edge

7 Screws

8 Heel

9 Back side of gauge base

0 Inside edge of gauge plate

q Gauge plate

w Gauge base

e Pan head screw

r Planer blade locating lugs

t Heel of adjust plate

y Set plate

u Inside flank of gauge plate

i Mini planer blade

o Hex. flange head bolt

p Groove

a Knob

s Switch trigger

d Lock button/

Lock-off button

f Start

g End

h Blade edge

j Cutting line

k Screw

l Edge fence

; ‘‘V’’ groove

z Front base

x Align the ‘‘V’’ groove with the

edge of the workpiece.

c Nozzle assembly

v Chip cover screw

b Chip cover

n Fit pin on nozzle assembly

into this hole.

m Sharpening holder

, Wing nut

. Blade (A)

/ Blade (B)

¡ Side (C)

™ Side (D)

£ Chip cover

¢ Makita vacuum cleaner

∞ Limit mark

§ Screwdriver

¶ Brush holder cap

SPECIFICATIONS

Model 1923B/N1923B

Planing width ................................................. 82 mm

Planing depth ................................................... 1 mm

Shiplapping depth .......................................... 23 mm

No load speed (RPM) .................................... 16,000

Overall length ............................................... 293 mm

Net weight ....................................................... 2.9 kg

•

Due to the continuing program of research and

development, the specifications herein are subject

to change without prior notice.

•

Note: Specifications may differ from country to

country.

Power supply

The machine should be connected only to a power

supply of the same voltage as indicated on the

nameplate, and can only be operated on single-phase

AC supply. They are double-insulated in accordance

with European Standard and can, therefore, also be

used from sockets without earth wire.

Safety hints

For your own safety, please refer to enclosed Safety

instructions.

These symbols mean:

Read instruction manual.

DOUBLE INSULATION

ADDITIONAL SAFETY RULES

1. Rags, cloth, cord, string and the like should

never be left around the work area.

2. Avoid cutting nails. Inspect for and remove all

nails from the workpiece before operation.

3. Handle the blades very carefully.

4. Be sure the blade installation bolts are

securely tightened before operation.

5. Hold the machine firmly with both hands.

6. Keep hands away from rotating parts.

7. Before using the machine on an actual work-

piece, let it run for a while. Watch for vibration

or wobbling that could indicate poor installa-

tion or a poorly balanced blade.

8. Make sure the blade is not contacting the

workpiece before the switch is turned on.

9. Wait until the blade attains full speed before

cutting.

10. Keep at least 200 mm away from the machine

at all times.

11. Always switch off and wait for the blades to

come to a complete stop before any adjusting.

12. Never stick your finger into the chip chute.

Chute may jam when cutting damp wood.

Clean out chips with a stick.

13. Do not leave the machine running. Operate the

machine only when hand-held.

14. When leaving the planer, switch off and set it

with the front base up on a wooden block, so

that the blades do not contact anything.

15. Always change both blades or covers on the

drum, otherwise the resulting imbalance will

cause vibration and shorten machine life.

16. Wait for complete run-down before putting the

machine aside.

17. Use only Makita blades specified in this

manual.

SAVE THESE INSTRUCTIONS.

1923B/N1923B (Eng) (’97. 7. 8)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita N1923B in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Makita N1923B

Makita N1923B User Manual - English, Dutch - 13 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita N1923B Manual

Product: