Manual Makita M8600 (page 4 of 36) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish)

691237

Zoom out

Zoom in

1/36

ENGLISH (Original instructions)

Explanation of general view

• Due to our continuing program of research and

development, the specications herein are subject to

changewithoutnotice.

• Specicationsmaydifferfromcountrytocountry.

• WeightaccordingtoEPTA-Procedure01/2003

ENE045-1

Intended use

Thetoolisintendedforchisellingworkinconcrete,brick,

stoneandasphaltaswellasfordrivingandcompacting

withappropriateaccessories.

ENF002-2

Power supply

Thetoolshouldbeconnectedonlytoapowersupplyof

the same voltage as indicated on the nameplate, and

canonly beoperatedon single-phaseAC supply.They

are double-insulated and can, therefore, also be used

fromsocketswithoutearthwire.

GEA010-1

General Power Tool Safety Warnings

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, re and/or

seriousinjury.

Save all warnings and instructions for future

reference.

GEB004-6

HAMMER SAFETY WARNINGS

1. Wear ear protectors. Exposuretonoisecancause

hearingloss.

2. Use auxiliary handle(s), if supplied with the tool.

Lossofcontrolcancausepersonalinjury.

3. Hold power tool by insulated gripping surfaces,

when performing an operation where the cutting

accessory may contact hidden wiring or its own

cord. Cuttingaccessorycontactinga“live”wiremay

make exposed metal parts of the power tool “live”

andcouldgivetheoperatoranelectricshock.

4. Wear a hard hat (safety helmet), safety glasses

and/or face shield. Ordinary eye or sun glasses

are NOT safety glasses. It is also highly

recommended that you wear a dust mask and

thickly padded gloves.

1 Lockbutton

2 Switchtrigger

3 Sidegrip

4 Bitshank

5 Grease

6 Bit

7 Changering

8 Commutator

9 Insulatingtip

10 Carbonbrush

11 Screwdriver

12 Rearcover

13 Brushholdercap

SPECIFICATIONS

Model M8600

Blowsperminute 2,900min

–1

Overalllength 406mm

Netweight 5.4kg

Safetyclass

/II

5. Be sure the bit is secured in place before

operation.

6. Under normal operation, the tool is designed to

produce vibration. The screws can come loose

easily, causing a breakdown or accident. Check

tightness of screws carefully before operation.

7. In cold weather or when the tool has not been

used for a long time, let the tool warm up for

a while by operating it under no load. This will

loosen up the lubrication. Without proper warm-

up, hammering operation is difcult.

8. Always be sure you have a rm footing.

Be sure no one is below when using the tool in

high locations.

9. Hold the tool rmly with both hands.

10. Keep hands away from moving parts.

11. Do not leave the tool running. Operate the tool

only when hand-held.

12. Do not point the tool at any one in the area

when operating. The bit could y out and injure

someone seriously.

13. Do not touch the bit or parts close to the bit

immediately after operation; they may be

extremely hot and could burn your skin.

14. Do not operate the tool at no-load unnecessarily.

15. Some material contains chemicals which may

be toxic. Take caution to prevent dust inhalation

and skin contact. Follow material supplier safety

data.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity with product

(gained from repeated use) replace strict adherence

to safety rules for the subject product. MISUSE

or failure to follow the safety rules stated in this

instruction manual may cause serious personal

injury.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita M8600 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 1,47 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita M8600 Manual

Product: