Manual Makita LW1400 (page 10 of 64) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish)

691732

Zoom out

Zoom in

1/64

10 ENGLISH

inthegure.Youcanmoreefcientlyutilizetheworn

wheelbyusingthemidpointontheperipheryofthe

wheeltocuttheworkpiece.Useasturdyandnon-am-

mablematerialforaspacerblock.

►Fig.19: 1.Spacerblock

When cutting workpieces over 85 mm wide at an angle,

attach a straight piece of wood (spacer) over 190 mm

long x 45 mm wide to the guide plate as shown in the

gure.Attachthisspacerwithscrewsthroughtheholes

in the guide plate. Make sure that the cut-off wheel does

not contact the spacer when the tool head is depressed.

►Fig.20: 1. Guide plate 2.Spacerblock(over190

mm long x45 mm wide) 3. Workpiece (over

85 mm wide) 4. Vise plate

►Fig.21

When the cut-off wheel has worn down, raise the cutting

positionbyputtingaspacerblockwhichisslightlynar-

rowerthantheworkpieceasshowninthegure.This

will help you to utilize the wheel economically.

►Fig.22: 1. Vise plate 2. Workpiece diameter

3. Guide plate 4.Spacerblockwidth

Longworkpiecesmustbesupportedbyblockson

eithersidesothatitwillbelevelwiththebasetop.Use

non-ammablematerialforsupportingblocks.

►Fig.23: 1.Supportingblock

Carrying tool

Folddownthetoolheadandlockit.Holdthehandle

when carrying.

►Fig.24

MAINTENANCE

CAUTION: Always be sure that the tool is

switched off and unplugged before attempting to

perform inspection or maintenance.

NOTICE: Never use gasoline, benzine, thinner,

alcohol or the like. Discoloration, deformation or

cracks may result.

Replacing carbon brushes

►Fig.25: 1. Limit mark

Checkthecarbonbrushesregularly.

Replace them when they wear down to the limit mark.

Keepthecarbonbrushescleanandfreetoslipinthe

holders.Bothcarbonbrushesshouldbereplacedatthe

sametime.Useonlyidenticalcarbonbrushes.

1. Useascrewdrivertoremovethebrushholder

caps.

2. Takeouttheworncarbonbrushes,insertthenew

onesandsecurethebrushholdercaps.

►Fig.26: 1. Brush holder cap

OPTIONAL

ACCESSORIES

CAUTION: These accessories or attachments

are recommended for use with your Makita tool

specied in this manual. The use of any other

accessories or attachments might present a risk of

injurytopersons.Onlyuseaccessoryorattachment

for its stated purpose.

If you need any assistance for more details regard-

ing these accessories, ask your local Makita Service

Center.

• Abrasivecut-offwheels

• Socket wrench (for LW1401 only)

NOTE:Someitemsinthelistmaybeincludedinthe

tool package as standard accessories. They may

differ from country to country.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita LW1400 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 11,49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita LW1400 Manual

Product: