Manual Makita LS 1216L (page 16 of 160) (English, German, Dutch, Danish, French, Italian, Portuguese, Spanish)

448603

Zoom out

Zoom in

1/160

Special Max. Cutting capacities

Special Max Width Cutting Capacities (with 38 mm (1-1/2”) thick platform used)

Refer to OPERATION for the cutting procedure.

No load speed (min

–1

) ............................................................................................................................................ 3,200

Laser Type (LS1216L/LS1216FL only).................................................... Red Laser 650 nm, <1.6mW (Laser Class 2M)

Dimensions (L x W x H) ..................................................................................................... 806 mm x 640 mm x 721 mm

Net weight

For all countries other than European countries

LS1216 ...............................................................................................................................................................26,3 kg

LS1216L/LS1216F .............................................................................................................................................26,4 kg

LS1216FL...........................................................................................................................................................26,5 kg

For European countries

LS1216 ...............................................................................................................................................................26,5 kg

LS1216L/LS1216F .............................................................................................................................................26,6 kg

LS1216FL...........................................................................................................................................................26,7 kg

Safety class ............................................................................................................................................................. /II

• Due to our continuing program of research and devel-

opment, the specifications herein are subject to change

without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

Intended use

The tool is intended for accurate straight and miter cut-

ting in wood. With appropriate saw blades, aluminum can

also be sawed.

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated in accordance with European Standard

and can, therefore, also be used from sockets without

earth wire.

GEA010-1

General Power Tool Safety Warnings

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and instruc-

tions may result in electric shock, fire and/or serious

injury.

Save all warnings and instructions for future refer-

ence.

ENB034-6

ADDITIONAL SAFETY RULES FOR TOOL

1. Wear eye protection.

2. Keep hands out of path of saw blade. Avoid con-

tact with any coasting blade. It can still cause

severe injury.

3. Do not operate saw without guards in place.

Check blade guard for proper closing before

each use. Do not operate saw if blade guard

does not move freely and close instantly. Never

clamp or tie the blade guard into the open posi-

tion.

4. Do not perform any operation freehand. The

workpiece must be secured firmly against the turn

base and guide fence with the vise during all opera-

tions. Never use your hand to secure the workpiece.

5. Never reach around saw blade.

6. Turn off tool and wait for saw blade to stop

before moving workpiece or changing settings.

7. Unplug tool before changing blade or servicing.

8. Always secure all moving portions before carry-

ing the tool.

9. Stopper pin which locks the cutter head down is

for carrying and storage purposes only and not

for any cutting operations.

52° (left and

right)

–

87 mm × 233 mm

102 mm × 220 mm

–

Thickness of wood

facing on guide

fence for increased

height of cut

25 mm – 115 mm × 178 mm –

35 mm – 120 mm × 155 mm –

60° (right)

–

87 mm × 185 mm

102 mm × 178 mm

–

Thickness of wood

facing on guide

fence for increased

height of cut

25 mm – 115 mm × 140 mm –

35 mm – 120 mm × 122 mm –

Crown molding 45° type (with Crown molding stopper used) 203 mm

Base board (H) (with Horizontal vise used) 165 mm

Bevel angle Miter angle Max. cutting

0°

0° 416 mm

45° (left and right) 292 mm

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita LS 1216L in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita LS 1216L Manual

Product: