448602
54
Zoom out
Zoom in
Previous page
1/160
Next page
54
Messen
Messen Sie die Wandlänge, und stellen Sie das Werkstück auf dem Tisch ein, um die Wandkontaktkante auf die
gewünschte Länge zu schneiden. Vergewissern Sie sich stets, dass die geschnittene Werkstücklänge auf der Rück-
seite des Werkstücks der Wandlänge entspricht. Stellen Sie die Schnittlänge auf den Schnittwinkel ein. Verwenden
Sie stets mehrere Stücke für Probeschnitte, um die Sägenwinkel zu überprüfen.
Wenn Sie Decken- und Hohlleisten schneiden, stellen Sie den Neigungs- und Gehrungswinkel gemäß den Angaben in
Tabelle (A) ein, und legen Sie die Leisten auf die Oberseite der Grundplatte, wie in Tabelle (B) angegeben.
Im Falle eines Linksneigungsschnitts
Tabelle (A)
Tabelle (B)
Beispiel:
Schneiden einer 52/38°-Deckenleiste für Position (1) in Abb. 47 und 48:
Neigungswinkel auf 33,9° LINKS einstellen und sichern.
Gehrungswinkel auf 31,6° RECHTS einstellen und sichern.
Die Deckenleiste mit ihrer breiten (verborgenen) Rückseite auf den Drehteller legen, so dass ihre DECKENKON-
TAKTKANTE am Gehrungsanschlag der Säge anliegt.
Das zu verwendende fertige Stück befindet sich nach der Ausführung des Schnitts immer auf der LINKEN Seite des
Sägeblatts.
Im Falle eines Rechtsneigungsschnitts
Tabelle (A)
Tabelle (B)
Leistenposition in
Abb. 47 und 48
Neigungswinkel Gehrungswinkel
52/38°-Typ 45°-Typ 52/38°-Typ 4-Typ
Für Innenecke
(1)
Links 33,9° Links 30°
Rechts 31,6° Rechts 35,3°
(2)
Links 31, Links 35,3°
Für Außenecke
(3)
(4) Rechts 31,6° Rechts 35,3°
Leistenposition in
Abb. 47 und 48
Leistenkante gegen
Gehrungsanschlag
Fertiges Stück
Für Innenecke
(1)
Die Deckenkontaktkante muss am
Gehrungsanschlag anliegen.
Das fertige Stück befindet sich auf
der linken Seite des Sägeblatts.
(2)
Die Wandkontaktkante muss am
Gehrungsanschlag anliegen.
Für Außenecke
(3)
Das fertige Stück befindet sich auf
der rechten Seite des Sägeblatts.
(4)
Die Deckenkontaktkante muss am
Gehrungsanschlag anliegen.
Leistenposition in
Abb. 47 und 48
Neigungswinkel Gehrungswinkel
52/38°-Typ 45°-Typ 52/38°-Typ 4-Typ
Für Innenecke
(1)
Rechts 33,9° Rechts 30°
Rechts 31,6° Rechts 35,3°
(2)
Links 31, Links 35,3°
Für Außenecke
(3)
(4) Rechts 31,6° Rechts 35,3°
Leistenposition in
Abb. 47 und 48
Leistenkante gegen
Gehrungsanschlag
Fertiges Stück
Für Innenecke
(1)
Die Wandkontaktkante muss am
Gehrungsanschlag anliegen.
Das fertige Stück befindet sich auf
der rechten Seite des Sägeblatts.
(2)
Die Deckenkontaktkante muss am
Gehrungsanschlag anliegen.
Für Außenecke
(3)
Das fertige Stück befindet sich auf
der linken Seite des Sägeblatts.
(4)
Die Wandkontaktkante muss am
Gehrungsanschlag anliegen.
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita LS 1216F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita LS 1216F in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info