Manual Makita LS 1214 (page 13 of 120) (English, German, Dutch, Danish, French, Italian, Portuguese, Spanish)

448598

Zoom out

Zoom in

1/120

• Always set SUB-FENCE to left position when performing left bevel cuts. Failure to do so may

cause serious injury to operator.

• Lorsque vous effectuez des coupes en biseau sur la gauche, placez toujours la BUTÉE PARE-

ÉCLATS ROTATIVE à gauche. Sinon, il y a risque de blessure grave.

• Stellen Sie den ZUSATZANSCHLAG bei der Durchführung von Neigungsschnitten immer auf die

linke Position. Anderenfalls kann die Bedienungsperson ernsthaft verletzt werden.

• Posizionare sempre la guida pezzo secondaria a sinistra prima di eseguire i tagli a unghia. In caso

contrario, c’è pericolo di lesioni serie all’operatore.

• Zet de HULPGELEIDER altijd in de linkse positie wanneer u linkse schuine sneden wilt zagen. Als

u dit niet doet, kan de gebruiker ernstige verwonding oplopen.

• Ponga siempre la GUÍA AUXILIAR en la posición izquierda cuando realice cortes en bisel

izquierdo. De lo contrario, podrá sufrir graves heridas.

• Coloque sempre a GUIA AUXILIAR no lado esquerdo quando executa cortes de bisel à esquerda.

Se não o fizer pode ferir o operador.

• Anbing altid hjælpeanslaget (SUB-FENCE) i venstre position, når der laves skråsnit. Forsømmelse

af dette kan bevirke, at operatøren kommer alvorligt til skade.

• Πάνττε ρυθµίετε τ SUB-FENCE (ΥΠ-ΦΡΑΚΤΗ) στην αριστερή θέση ταν εκτελείτε

αριστερές λές κπές. Αµέλεια να τ κάνετε µπρεί να πρκαλέσει σαρ τραυµατισµ

στν ρήστη.

• Always remove SUB-FENCE R when performing right bevel cuts. Failure to do so may cause seri-

ous injury to operator.

• Retirez toujours la BUTÉE PARE-ÉCLATS ROTATIVE DE DROITE lorsque vous effectuez des

coupes en biseau sur la gauche. Sinon, il y a risque de blessure grave.

• Vor der Ausführung von rechtsseitigen Neigungsschnitten muss der ZUSATZANSCHLAG R immer

entfernt werden. Anderenfalls kann die Bedienungsperson ernsthaft verletzt werden.

• Rimuovere sempre la guida pezzo secondaria R per eseguire i tagli a unghia destri. In caso con-

trario, c’è pericolo di lesioni serie all’operatore.

• Verwijder altijd de HULPGELEIDER R wanneer u rechtse schuine sneden wilt zagen. Als u dit niet

doet, kan de gebruiker ernstige verwonding oplopen.

• Quite siempre la GUÍA AUXILIAR DERECHA cuando realice cortes en bisel derecho. De lo con-

trario, podrá sufrir graves heridas.

• Retire sempre a GUIA AUXILIAR Direita quando executa cortes de bisel à direita. Se não o fizer

pode ferir o operador.

• Fjern altid det højre hjælpeanslag (SUB-FENCE R), når der laves højre skråsnit. Forsømmelse af

dette kan bevirke, at operatøren kommer alvorligt til skade.

• Πάνττε αφαιρείτε τν SUB-FENCE R (ΥΠ-ΦΡΑΚΤΗ R) ταν εκτελείτε δειές λές

κπές. Αµέλεια να τ κάνετε µπρεί να πρκαλέσει σαρ τραυµατισµ στν ρήστη.

• Never look into the laser beam. Direct laser beam may injure your eyes.

• Ne jamais regarder directement la source du faisceau laser. L’exposition directe au faisceau laser

comporte un risque de blessure aux yeux.

• Blicken Sie auf keinen Fall in den Laserstrahl. Der direkte Laserstrahl kann Ihre Augen verletzen.

• Mai guardare direttamente il raggio laser. Il raggio laser può danneggiare gli occhi.

• Kijk nooit in de laserstraal. Een directe laserstraal kan oogletsel veroorzaken.

• No mire nunca directamente al rayo láser. El rayo láser directo puede dañar sus ojos.

• Nunca olhe para o raio laser. Se olhar directamente para o raio laser pode ferir os seus olhos.

• Se aldrig ind i laserstrålen. Direkte udsættelse for laserstråling kan skade dit syn.

• Πτέ µη κυττάτε απευθείας την ακτίνα λέιερ. Η απευθείας ακτίνα λέιερ µπρεί να

πρκαλέσει τραυµατισµ στα µάτια σας.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita LS 1214 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Makita LS 1214

Makita LS 1214 User Manual - English, Dutch - 34 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita LS 1214 Manual

Product: