448595
11
Zoom out
Zoom in
Previous page
1/128
Next page
11
ENGLISH (Original Instructions)
Explanation of general view
SPECIFICATIONS
Model LS1018/LS1018L
Blade diameter 255 mm - 260 mm
Hole diameter
For all countries other than European countries 25.4 mm
For European countries 30 mm
Max. Cutting capacities (H x W) with 260 mm in diameter
No load speed (min
-1
) 4,300
Laser Type (LS1018L only) Red Laser 650 nm, <1 mW (Laser Class 2)
Dimensions (L x W x H) 825 mm x 536 mm x 633 mm
Net weight For all countries other than European countries............19.8 kg
For European countries............19.9 kg
Safety class /II
Due to our continuing programme of research and development, the specifications herein are subject to change without
notice.
Specifications may differ from country to country.
Weight according to EPTA-Procedure 01/2003
1. Stopper pin
2. Bolts
3. Blade guard
4. Kerf board
5. Screw
6. Saw blade
7. Blade teeth
8. Left bevel cut
9. Straight cut
10. Right bevel cut
11. Adjusting bolt
12. Turn base
13. Top surface of turn base
14. Periphery of blade
15. Guide fence
16. Stopper arm
17. Adjusting screw
18. Miter scale
19. Pointer
20. Lock lever
21. Grip
22. Lever
23. Arm
24. Bevel scale
25. Release button
26. Locking screw
27. Lock-off button
28. Switch trigger
29. Hole for padlock
30. Switch for laser
31. Screw holding the laser unit box
32. Dry cell
33. Socket wrench with hex wrench
on its other end
34. Wrench holder
35. Socket wrench
36. Blade case
37. Center cover
38. Hex bolt
39. Arrow
40. Shaft lock
41. Hex bolt (left-handed)
42. Outer flange
43. Ring
44. Inner flange
45. Spindle
46. Dust nozzle
47. Dust bag
48. Fastener
49. Support
50. Sliding fence
51. Clamping screw
52. Sub-fence R
53. Screws
54. Vise arm
55. Vise knob
56. Vise rod
57. Vise plate
58. Vise nut
59. Holder
60. 52/38° type crown molding
61. 45° type crown molding
62. 45° type cove molding
63. Inside corner
64. Outside corner
65. Vise
66. Spacer block
67. Aluminum extrusion
68. Horizontal vise (optional
accessory)
69. Holes
70. Cut grooves with blade
71. Triangular rule
72. 0° adjusting bolt
73. Left 45° bevel angle adjusting bolt
74. Right 45° bevel angle adjusting
bolt
75. Screwdriver
76. Brush holder cap
Miter angle
Bevel angle
45° (left) 45° (right)
50 mm x 310 mm 91 mm x 310 mm 31 mm x 310 mm
45° 50 mm x 220 mm 91 mm x 220 mm 31 mm x 220 mm
60° (right) - 91 mm x 153 mm -
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita LS 1018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita LS 1018 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info