448566

Makita JS 1600 Manual

6
Zoom out
Zoom in
Previous page
1/44
Next page
Switch action
For tools with pivot type lock-off lever
(Fig.7&8)
CAUTION:
•
Before plugging in the tool, always check to see that
the paddle switch actuates properly and returns to
the ‘‘OFF’’ position when released.
•
The switch lever does not actuate when the lock-off
lever is in the LOCK position. Do not try to actuate
the switch lever when the lock-off lever is in the
LOCK position.
•
When not operating the tool, keep the lock-off lever
in the LOCK position.
To prevent the switch from being accidentally actu-
ated, a lock-off lever is provided. To start the tool, turn
the lock-off lever to the FREE position and then
squeeze the switch lever. Release the switch lever to
stop.
For tools with slide type lock-off lever (Fig. 9)
CAUTION:
Before plugging in the tool, always check to see that
the paddle switch actuates properly and returns to the
‘‘OFF’’ position when released.
To prevent the switch from being accidentally actu-
ated, a lock-off lever is provided. To start the tool,
slide the lock-off lever in the direction of the arrow and
squeeze the switch lever. Release the switch lever to
stop.
Permissible shearing thickness (Fig. 10)
The groove on the yoke serves as a thickness gauge
for shearing mild or stainless steel plate. If the mate-
rial fits within the groove, it is shearable.
The thickness of materials to be sheared depends
upon the type (strength) of the material. The maxi-
mum shearing thickness is indicated in the table
below in terms of various materials. Attempting to
shear materials thicker than indicated will result in tool
breakdown and/or possible injury. Keep within the
thickness shown below.
Material
Tensile
strength
(kg/mm
2
)
Max. cutting
thickness (mm)
Mild steel 35 1.6
Hard steel 50 1.2
Stainless steel 50 1.2
Aluminum plate 25 2.0
Holding material (Fig. 11)
The materials for cutting should be fastened to the work bench by means of workholders.
Shearing method (Fig. 12)
Keep the shear moving parallel with the material.
Maximum cutting width
Stay within the specified maximum cutting width (A): Case of length 1,800 mm.
Mild steel
(thickness)
1.6 mm
Under
1.2 mm
Max. cutting
width (A)
100 mm No limit
Stainless
(thickness)
1.2 mm
Under
1.0 mm
Max. cutting
width (A)
80 mm No limit
Minimum cutting radius
Minimum cutting radius is 30 mm when cutting 1.0 mm mild steel.
1,800 mm
A
Cutting line
6
JS1600 (E) (’101. 1. 9)
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita JS 1600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita JS 1600 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Makita JS 1600

Makita JS 1600 User Manual - English, Dutch - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info