448563
25
Zoom out
Zoom in
Previous page
1/28
Next page
25
ENG104-2
Geräusch
Typischer A-bewerteter Geräuschpegel ermittelt gemäß
EN60745:
Schalldruckpegel (L
pA
): 77 dB (A)
Ungewissheit (K): 3 dB (A)
Der Lärmpegel kann während des Betriebs 80 dB (A)
überschreiten.
Gehörschutz tragen.
ENG218-2
Vibration
Vibrationsgesamtwert (Drei-Achsen-Vektorsumme) ermittelt
gemäß EN60745:
Arbeitsmodus: Schneiden von Blechen
Vibrationsemission (a
h
): 9,5 m/s
2
Ungewissheit (K): 1,5 m/s
2
ENG901-1
Der angegebene Vibrationsemissionswert wurde im Eink-
lang mit der Standardprüfmethode gemessen und kann für
den Vergleich zwischen Maschinen herangezogen werden.
• Der angegebene Vibrationsemissionswert kann auch für
eine Vorbewertung des Gefährdungsgrads verwendet wer-
den.
WARNUNG:
Die Vibrationsemission während der tatsächlichen Benut-
zung des Elektrowerkzeugs kann je nach der Benutzungs-
weise der Maschiene vom angegebenen Emissionswert
abweichen.
Identifizieren Sie Sicherheitsmaßnahmen zum Schutz des
Benutzers anhand einer Schätzung des Gefährdungsgrads
unter den tatsächlichen Benutzungsbedingungen (unter
Berücksichtigung aller Phasen des Arbeitszyklus, wie z. B.
Ausschalt- und Leerlaufzeiten der Maschiene zusätzlich zur
Betriebszeit).
ENG104-2
Rumore
Il tipico livello di rumore pesato A determinato secondo
EN60745:
Livello pressione sonora (L
pA
): 77 dB (A)
Incertezza (K): 3 dB (A)
Il livello di rumore durante il lavoro potrebbe superare gli
80 dB (A).
Indossare i paraorecchi.
ENG218-2
Vibrazione
Il valore totale di vibrazione (somma vettore triassiale)
determinato secondo EN60745:
Modalità operativa: taglio delle lamiere
Emissione di vibrazione (a
h
): 9,5 m/s
2
Incertezza (K): 1,5 m/s
2
ENG901-1
Il valore di emissione delle vibrazioni dichiarato è stato mis-
urato conformemente al metodo di test standard, e può
essere usato per paragonare un utensile con un altro.
Il valore di emissione delle vibrazioni dichiarato può anche
essere usato per una valutazione preliminare dell’esposiz-
ione.
AVVERTIMENTO:
L’emissione delle vibrazioni durante l’uso reale dell’utensile
elettrico può differire dal valore di emissione dichiarato a
seconda dei modi in cui viene usato l’utensile.
Identificare le misure di sicurezza per la protezione
dell’operatore basate sulla stima dell’esposizione nelle con-
dizioni reali d’utilizzo (tenendo presente tutte le parti del
ciclo operativo, come le volte in cui l’utensile viene spento e
quando gira a vuoto, oltre al tempo di funzionamento).
DEUTSCH ITALIANO
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita JS 1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita JS 1000 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info