Manual Makita HTR 5600 (page 4 of 86) (English, German, Dutch, French, Italian, Spanish)

78549

Zoom out

Zoom in

1/86

Starting up the Hedge Trimmer

– Please make sure that there are children or other people within a

working range of or 15 meters (5), also pay attention to any animals in

the working vicinity. avoid operating while people, especially

children are nearby.

– Before operating, always check that the Hedge

Trimmer is safe for operation:

Check the security of the throttle lever. The throttle lever should be

checked for smooth and easy action. Check for proper functioning

of the throttle lever lock. Check for clean and dry handles and test

the function of the STOP Switch. Keep handles free of oil and fuel.

Start the Hedge Trimmer only in accordance with the instructions.

Do not use any other methods for starting the engine (6)!

– Use the Hedge Trimmer only for applications specified.

– Start the Hedge Trimmer enjine only after the entire assembly is done.

Operation of the Hedge Trimmer is permitted only after all the

appropriate accessories are attached!

– Before starting, make sure that the cutter blade will not contact any

objects such as branches, stones, elc.

– The engine is to be stopped immediately if there are any engine

problems.

– When working with the Hedge Trimmer, keep both hands on handles

always wrap your fingers tightly around the handle, keeping the

control handle cradled between your thumb and forefinger. Keep

your hand in this position to have your machine under control at all

times. Make sure your control handle is in good condition and free

of moisture, pitch, oil or grease.

Always ensure a safe, well-balanced footing

– Only use outdoors.

– Always be aware of your surroundings and stay alert for possible

hazards that you may not hear due to the noise of the machine.

– Operate the Hedge Trimmer in such a manner as to avoid inhalation

of the exhaust gases. Never run the engine in enclosed rooms (risk

of suffocation and gas poisoning). Carbon monoxide is an odorless

gas. Always ensure there is adequate ventilation.

– Stop the engine when resting and when leaving the Hedge Trimmer

unattended. Place it in a safe location to prevent danger to others,

setting fire to combustible materials or damage to the machine.

– Never lay down the hot Hedge Trimmer onto dry grass or onto any

combustible materials.

– To reduce fire hazard keep engine and silencer free of debris, leaves,

or excessive lubricant;

– Never operate the engine with a faulty exhaust muffler.

– Stop the engine during transport (7).

– Stop the engine or disconnect from mains before:

– Cleaning or when cleaning a blockage;

– Checking, maintenance or working on the machine.

– Position the Hedge Trimmer safely during car or truck transportation

to avoid fuel leakage.

– When transporting the Hedge Trimmer ensure that the fuel tank is

completely empty to avoid fuel leakage.

– When transporting or storing the machine always fit the cutting

device guard

Refuelling

– Stop the engine before refuelling (7), keep well away from open flame

(8) and do not smoke.

– Do not attempt to refuel a hot or a running engine.

– Avoid skin contact with petroleum products. Do not inhale fuel

vapor. Always wear protective gloves during refuelling. Change

and clean protective clothing at regular intervals.

– Take care not to spill either fuel or oil in order to prevent soil

contamination (environmental protection). Clean the Hedge

Trimmer immediately after fuel has been spilt. Allow wet cloths to

dry before disposing in proper, covered container to prevent

spontaneous combustion.

– Avoid any fuel contact with your clothing. Change your clothing

immediately if fuel has been spilled on it (danger hazard).

– Inspect the fuel cap at regular intervals making sure that it stays

securely fastened.

– Carefully tighten the locking screw of the fuel tank. Change

locations to start the engine (at least 3 meters away from the place of

refuelling) (9).

– Never refuel in closed rooms. Fuel vapors accumulate at ground

level (risk of explosions).

– Only transport and store fuel in approved containers. Make sure

stored fuel is not accessible to children.

– When mixing gasoline with two-stroke engine oil, use only gasoline

which contains no ethanol or methanol (types of alcohol).

This will help to prevent damage to fuel lines and other engine parts.

(5)

(6)

• Resting

• Transporting

• Refuelling

• Maintenance

• Tool Replacement

(7)

(8)

(9)

15 meters

(50 feet)

3 meters

(10 feet)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita HTR 5600 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita HTR 5600 Manual

Product: