Manual Makita HS0600 (page 6 of 68) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish)

691834

Zoom out

Zoom in

1/68

6 ENGLISH

ENGLISH (Original instructions)

SPECIFICATIONS

Model: HS0600

Blade diameter 255 mm 260 mm 270 mm

Max. Cutting depth at 0° 94 mm 97 mm 101 mm

at 45° bevel 65 mm 68 mm 71 mm

at 50° bevel 59 mm 61 mm 63 mm

No load speed 4,300 min

-1

Overall length 418 mm

Net weight 6.9 kg

Safety class

/II

• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange

without notice.

• Specicationsmaydifferfromcountrytocountry.

• WeightaccordingtoEPTA-Procedure01/2014

Intended use

Thetoolisintendedforperforminglengthwaysand

crossways straight cuts and mitre cuts with angles in

woodwhileinrmcontactwiththeworkpiece.With

appropriate Makita genuine saw blades, other materials

can also be sawed.

Power supply

Thetoolshouldbeconnectedonlytoapowersupplyof

the same voltage as indicated on the nameplate, and

canonlybeoperatedonsingle-phaseACsupply.They

are double-insulated and can, therefore, also be used

from sockets without earth wire.

For public low-voltage distribution

systems of between 220 V and 250 V

Switching operations of electric apparatus cause volt-

ageuctuations.Theoperationofthisdeviceunder

unfavorable mains conditions can have adverse effects

totheoperationofotherequipment.Withamains

impedance equal or less than 0.28 Ohms it can be pre-

sumedthattherewillbenonegativeeffects.Themains

socket used for this device must be protected with a

fuse or protective circuit breaker having slow tripping

characteristics.

Noise

ThetypicalA-weightednoiseleveldeterminedaccord-

ing to 62841-2-5:

Sound pressure level (L

):94dB(A)

Sound power level (L

):105dB(A)

Uncertainty(K):3dB(A)

WARNING: Wear ear protection.

Vibration

Thevibrationtotalvalue(tri-axialvectorsum)deter-

mined according to 62841-2-5:

Workmode:cuttingwood

Vibration emission (a

h,W

) : 2.5 m/s

or less

Uncertainty (K) : 1.5 m/s

NOTE:

Thedeclaredvibrationemissionvaluehasbeen

measured in accordance with the standard test method

and may be used for comparing one tool with another.

NOTE:

Thedeclaredvibrationemissionvaluemay

also be used in a preliminary assessment of exposure.

WARNING:

Thevibrationemissionduringactual

use of the power tool can differ from the declared emission

value depending on the ways in which the tool is used.

WARNING:

Be sure to identify safety measures to pro-

tect the operator that are based on an estimation of exposure

in the actual conditions of use (taking account of all parts of

the operating cycle such as the times when the tool is switched

off and when it is running idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only

TheECdeclarationofconformityisincludedasAnnexA

to this instruction manual.

SAFETY WARNINGS

General power tool safety warnings

WARNING:

Read all safety warnings, instruc-

tions, illustrations and specications provided with this

power tool. Failure to follow all instructions listed below

mayresultinelectricshock,reand/orseriousinjury.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita HS0600 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 10,39 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita HS0600 Manual

Product: