600313
52
Zoom out
Zoom in
Previous page
1/64
Next page
52
Tomoyasu Kato CE 2006
Director Amministratore
Directeur Directeur
Direktor Director
Responsible manufacturer: Produttore responsabile:
Fabricant responsable : Verantwoordelijke fabrikant:
Verantwortlicher Hersteller: Fabricante responsable:
Makita Corporation
3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN
Authorized Respresentative in Europe: Rappresentanti autorizzati in Europa:
Représentant agréé en Europe : Erkende vertegenwoordiger in Europa:
Autorisierte Vertretung in Europa: Representante autorizado en Europa:
Makita International Europe Ltd.
Michigan Drive, Tongwell, Milton Keynes,
Bucks MK15 8JD, ENGLAND
For Model HR2800
For European countries only
Vibration ENG217-1
The vibration total value (tri-axial vector sum) determined according
to EN60745-2-6:
Work mode: hammer drilling into concrete, 10 mm diameter
and 100 mm depth
Vibration emission (a
h,HD
): 20 m/s
2
Uncertainty (K): 1.5 m/s
2
Pour le modèle HR2800
Pour les pays d'Europe uniquement
Vibration ENG217-1
La valeur totale de vibration (somme du vecteur triaxial) déterminée
selon EN60745-2-6 :
Mode de fonctionnement : perçage avec impacts dans le
béton, 10 mm de diamètre et 100 mm de profondeur
Émission de vibrations (a
h,HD
) : 20 m/s
2
Incertitude (K) : 1,5 m/s
2
Modell HR2800
Nur für europäische Länder
Schwingung ENG217-1
Schwingungsgesamtwerte (Vektorsumme dreier Achsen) nach
EN60745-2-6:
Arbeitsmodus: Schlagbohren in Beton, 10 mm Durchmesser
und 100 mm Tiefe
Schwingungsbelastung (a
h,HD
): 20 m/s
2
Abweichung (K): 1,5 m/s
2
Per il modello HR2800
Solo per i paesi europei
Vibrazione ENG217-1
Il valore totale della vibrazione (somma vettoriale triassiale) è
determinato in conformità con la norma EN60745-2-6:
Modalità di lavoro: foratura con percussione in cemento,
10 mm di diametro e 100 mm di profondità
Emissione di vibrazioni (a
h,HD
): 20 m/s
2
.
Variazione (K): 1,5 m/s
2
.
Voor model HR2800
Alleen voor Europese landen
Trilling ENG217-1
De totale trilwaarde (triaxiale vectorsom) zoals vastgesteld conform
EN60745-2-6:
Werkmodus: drilboren in beton, 10 mm diameter en 100 mm
diepte
Trillingsemissie (a
h, HD
): 20 m/s
2
.
Onzekerheid (K): 1,5 m/s
2
.
Para el modelo HR2800
Sólo para países europeos
Vibración ENG217-1
Valor total de vibración (suma de vectores triaxiales) establecido
según la EN60745-2-6:
Modo de trabajo: perforación con percusión en hormigón,
10 mm de diámetro y 100 mm de profundidad
Emisión de vibraciones (a
h,HD
): 20 m/s
2
Incertidumbre (K): 1,5 m/s
2
ENGLISH
FRANÇAIS
DEUTSCH
ITALIANO
NEDERLANDS
ESPAÑOL
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita HR2811FT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita HR2811FT in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info