599664
7
Zoom out
Zoom in
Previous page
1/76
Next page
7
ENGLISH (Original instructions)
Explanation of general view
1 Switch trigger
2 Lock button
3 Lamp
4 Reversing switch lever
5 Quick change chuck for SDS-
plus
6 Change cover line
7 Change cover
8 Spindle
9 Quick change drill chuck
10 Rotation with hammering
11 Action mode changing knob
12 Rotation only
13 Hammering only
14 Hook
15 Protrusions
16 Grooves
17 Bit shank
18 Bit grease
19 Bit
20 Chuck cover
21 Grip base
22 Depth gauge
23 Toothed side of hex hole
marking on the grip base
24 Toothed side of the depth gauge
25 Dust cup
26 symbol
27 Attachment at the foot of dust
cup
28 Bellows
29 Attachment
30 Inside periphery
31 Flat side
32 Cap
33 Groove
34 Blow-out bulb
35 Drill chuck assembly (optional
accessory)
36 Chuck key
37 Sleeve
38 Ring
SPECIFICATIONS
Due to our continuing program of research and
development, the specifications herein are subject to
change without notice.
Specifications may differ from country to country.
Weight according to EPTA-Procedure 01/2003
ENE042-1
Intended use
The tool is intended for hammer drilling and drilling in
brick, concrete and stone.
It is also suitable for drilling without impact in wood,
metal, ceramic and plastic.
ENF002-2
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.
GEA010-1
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future
reference.
GEB007-7
ROTARY HAMMER SAFETY WARNINGS
1. Wear ear protectors. Exposure to noise can cause
hearing loss.
2. Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
3. Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring or its own
cord. Cutting accessory contacting a “live” wire may
make exposed metal parts of the power tool “live”
and could give the operator an electric shock.
Model HR2631F HR2631FT HR2641 HR2320T HR2630 HR2630T
Capacities
Concrete 26 mm 23 mm 26 mm
Core bit 68 mm
Diamond core bit
(dry type)
80 mm 70 mm 80 mm
Steel 13 mm
Wood 32 mm
No load speed 0 – 1,200 min
–1
0 – 1,100
min
–1
0 – 1,200 min
–1
Blows per minute 0 – 4,600 min
–1
0 – 4,500
min
–1
0 – 4,600 min
–1
Overall length 361 mm 385 mm 422 mm 380 mm 361 mm 385 mm
Net weight 2.9 kg 3.1 kg 2.9 kg 2.8 kg 3.0 kg
Safety class /II
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita HR2631FT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita HR2631FT in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 1,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info