599645
7
Zoom out
Zoom in
Previous page
1/72
Next page
7
ENGLISH (Original instructions)
Explanation of general view
1 Switch trigger
2 Lock button
3 Lamp
4 Reversing switch lever
5 Quick change chuck for SDS-
plus
6 Change cover line
7 Change cover
8 Spindle
9 Quick change drill chuck
10 Rotation with hammering
11 Rotation only
12 Action mode changing knob
13 Hammering only
14 Protrusions
15 Grooves
16 Bit shank
17 Bit grease
18 Bit
19 Chuck cover
20 Grip base
21 Depth gauge
22 Toothed side of hex hole mark-
ing on the grip base
23 Toothed side of the depth gauge
24 Dust cup
25 symbol
26 Attachment at the foot of dust
cup
27 Bellows
28 Attachment
29 Inside periphery
30 Carved side
31 Cap
32 Groove
33 Blow-out bulb
34 Chuck adapter
35 Keyless drill chuck
36 Sleeve
37 Ring
SPECIFICATIONS
Due to our continuing programme of research and
development, the specifications herein are subject to
change without notice.
Specifications may differ from country to country.
Weight according to EPTA-Procedure 01/2003
ENE042-1
Intended use
The tool is intended for hammer drilling and drilling in
brick, concrete and stone.
It is also suitable for drilling without impact in wood,
metal, ceramic and plastic.
ENF002-2
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.
GEA010-1
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future reference.
GEB007-7
ROTARY HAMMER SAFETY WARNINGS
1. Wear ear protectors. Exposure to noise can cause
hearing loss.
2. Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
3. Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring or its own
cord. Cutting accessory contacting a “live” wire may
make exposed metal parts of the power tool “live”
and could give the operator an electric shock.
4. Wear a hard hat (safety helmet), safety glasses
and/or face shield. Ordinary eye or sun glasses
are NOT safety glasses. It is also highly recom-
mended that you wear a dust mask and thickly
padded gloves.
5. Be sure the bit is secured in place before opera-
tion.
6. Under normal operation, the tool is designed to
produce vibration. The screws can come loose
easily, causing a breakdown or accident. Check
tightness of screws carefully before operation.
Model
HR2300 HR2310T HR2600 HR2601 HR2610 HR2610T HR2611F HR2611FT
Capacities
Concrete
23 mm 26 mm
Core bit
68 mm 68 mm 68 mm
Diamond core bit
(dry type)
70 mm 80 mm 80 mm
Steel
13 mm 13 mm 13 mm
Wood
32 mm 32 mm 32 mm
No load speed (min
–1
)
0 – 1,200
Blows per minute
0 – 4,600
Overall length
356 mm 380 mm 361 mm 385 mm 361 mm 385 mm
Net weight
2.7 kg 2.9 kg 2.8 kg 2.9 kg 2.8 kg 2.9 kg 2.9 kg 3.0 kg
Safety class
/II
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita HR2611F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita HR2611F in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info