793650
21
Zoom out
Zoom in
Previous page
1/188
Next page
21 ENGLISH
Uninstallation
1. Push the chuck cover down all the way and pull a
󰀨
Fig.29: 1. Bit 2. Chuck cover
2. Hold the attachment unit of the dust cup set and
pull it apart from the tool.
Fig.30: 1. Attachment unit
NOTE:󰀨
place it back to the original position.
1. Detach the bellows from the attachment unit of the
dust cup set.
Fig.31: 1. Bellows 2. Attachment unit
2. Set the cap back in place with its printed side
facing upwards.
Fig.32: 1. Cap 2. Printed side 3. Grooves 4. Lips of
upper opening 5. Attachment unit
3. 
the lips of the upper opening of the attachment unit.
Fig.33
DUST COLLECTION
SYSTEM
Optional accessory
The dust collection system is designed to collect dusts
󰀨
Fig.34: 1. Dust collection system
CAUTION: The dust collection system is
intended for drilling in concrete only. Do not use
the dust collection system for drilling in metal or
wood.
CAUTION: When using the tool with the dust

to the dust collection system to prevent dust
inhalation.
CAUTION: Before using the dust collection

Failure to do so may cause dust inhalation.
CAUTION: The dust collection system col-
lects the generated dust at a considerable rate,
but not all dust can be collected.
NOTICE: Do not use the dust collection system
for core drilling or chiseling.
NOTICE: Do not use the dust collection system
for metal or wood. The dust collection system is
intended for concrete only.
NOTICE: Do not use the dust collection system
for drilling in wet concrete or use this system
in wet environment. Failure to do so may cause
malfunction.
Installation
NOTICE: Before installing the dust collection
system, clean the joint parts of the tool and the
dust collection system. 
󰀩
system. If any dust remains on the air duct, the dust

breakage of the tool.
Hang the hooks of the dust collection system on the
pockets at the bottom front of the tool. Lift the nozzle
up to secure the dust collection system in place with a
click, so the air duct of the tool becomes covered with
the suction air outlet of the dust collection system.
Fig.35:
1. Hooks 2. Dust collection system 3. Pockets
4. Nozzle 5. Air duct 6. Suction air outlet
Uninstallation
󰀨
system, and lower the nozzle to release the upper part
of the dust collection system. Unhook the lower part of
the dust collection system from the tool.
Fig.36: 1. Dust collection system 2. Nozzle 3. Lock
󰀨
Adjusting nozzle position
CAUTION: Do not point the nozzle at yourself
or others when releasing the nozzle by pushing
the guide adjustment button.
Slide in and out the nozzle guide while pressing the


behind the front surface of the nozzle.
Fig.37: 1. Nozzle guide 2.
3. Tip of drill bit 4. Front surface of nozzle
Adjusting drilling depths


-
ment button and slide it to your desired position.
Fig.38:
1.2. Nozzle guide
3. Support arm for nozzle guide 4. Drilling depths

CAUTION:
Do not turn the dial on the dust case
while the dust case is removed from the dust collec-
tion system. Doing so may cause dust inhalation.
CAUTION: 󰀨
turning the dial on the dust case. Turning the dial
while the tool is running may result in the loss of
control of the tool.

󰀩
the number of times to dispose of the dust.
Turn the dial on the dust case three times after col-
lecting every 50,000 mm3 of dust or when you feel the
vacuum performance declined.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita HR009G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita HR009G in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 30.62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info