388908

Makita hr 4511 c Manual

8
Zoom out
Zoom in
Previous page
1/52
Next page
8
ACCESSORIES
CAUTION:
• These accessories or attachments are recommended
for use with your Makita tool specified in this manual.
The use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory
or attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
• SDS-Max Carbide-tipped bits
• SDS-Max bull point
• SDS-MAX cold chisel
• SDS-MAX scaling chisel
• SDS-MAX tile chisel
• SDS-MAX clay spade
• Hammer grease
• Bit grease
• Side handle
• Side grip
• Depth gauge
• Blow-out bulb
• Safety goggles
• Carrying case
For Model HR4501C
For European countries only
Noise
ENG102-2
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
pA
): 94 dB (A)
Sound power level (L
WA
): 105 dB (A)
Uncertainty (K): 3 dB (A)
Wear ear protection.
Vibration
ENG216-2
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode: chiseling function with side handle
Vibration emission (a
h,CHeq
): 12.5 m/s
2
Uncertainty (K): 1.5 m/s
2
ENG306-1
Work mode: chiseling function with side grip
Vibration emission (a
h,CHeq
): 12.5 m/s
2
Uncertainty (K): 1.5 m/s
2
ENG303-2
Work mode: hammer drilling into concrete
Vibration emission (a
h,HD
): 16 m/s
2
Uncertainty (K): 1.5 m/s
2
For Model HR4510C
For European countries only
Noise
ENG102-2
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
pA
): 93 dB (A)
Sound power level (L
WA
): 104 dB (A)
Uncertainty (K): 3 dB (A)
Wear ear protection.
Vibration
ENG216-2
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode: chiseling function with side handle
Vibration emission (a
h,CHeq
): 8.5 m/s
2
Uncertainty (K): 1.5 m/s
2
ENG306-1
Work mode: chiseling function with side grip
Vibration emission (a
h,CHeq
): 8.5 m/s
2
Uncertainty (K): 1.5 m/s
2
ENG303-2
Work mode: hammer drilling into concrete
Vibration emission (a
h,HD
): 9.5 m/s
2
Uncertainty (K): 2 m/s
2
For Model HR4511C
For European countries only
Noise
ENG102-2
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
pA
): 94 dB (A)
Sound power level (L
WA
): 105 dB (A)
Uncertainty (K): 3 dB (A)
Wear ear protection.
Vibration
ENG216-2
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode: chiseling function with side handle
Vibration emission (a
h,CHeq
): 7 m/s
2
Uncertainty (K): 1.5 m/s
2
ENG306-1
Work mode: chiseling function with side grip
Vibration emission (a
h,CHeq
): 7.5 m/s
2
Uncertainty (K): 1.5 m/s
2
ENG303-2
Work mode: hammer drilling into concrete
Vibration emission (a
h,HD
): 7.5 m/s
2
Uncertainty (K): 1.5 m/s
2
ENG901-1
• The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of exposure in
the actual conditions of use (taking account of all parts
of the operating cycle such as the times when the tool
is switched off and when it is running idle in addition to
the trigger time).
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita hr 4511 c at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita hr 4511 c in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info