Manual Makita HR 160D (page 7 of 64) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

448520

Zoom out

Zoom in

1/64

Bit grease

Coat the bit shank head beforehand with a small amount

of bit grease (about0.5–1g ; 0.02 – 0.04 oz).

This chuck lubrication assures smooth action and longer

service life.

Using the cold chisel or bull point (Fig. 9)

When using optional cold chisel or bull point, proceed as

follows.

1. Unplug the tool.

2. Remove the side grip from the tool.

3. Set the action mode changing knob to “rotation with

hammering”.

4. Install the chisel on the tool. Refer to “installing or

removing the drill bit” described on the previous

page.

5. Install the chisel adapter (optional accessory) on the

tool so that the chisel is inserted through the chisel

adapter.

6. Rotate the chisel so that the chisel faces toward the

direction suitable for your work. Then secure the

chisel and chisel adapter to the tool using the clamp

screw on the chisel adapter.

7. Set the action mode changing knob to “hammering

only”. Now you can use the chisel.

8. To remove the chisel, follow the installation proce-

dures in reverse.

CAUTION:

Always use “hammering only” action when the chisel

adapter is installed on the tool. If you use “rotation with

hammering” ot “rotation only”, a malfunction and damage

to the tool will result.

Blow-out bulb (Fig. 10)

Use the blow-out bulb to clean out the hole.

Dust cup (Fig. 11)

Use the dust cup to prevent dust from falling over the tool

and on yourself when performing overhead drilling opera-

tions. Attach the dust cup to the bit. The size of bits which

the dust cup can be attached to is as follows.

Drilling in wood or metal (Fig. 12)

Use the optional drill chuck assembly (consisting of drill

chuck and chuck adapter assembly). When installing it,

refer to “Installing or removing drill bit” described on the

previous page. Set the action mode changing knob to

“rotation only”. You can drill up to 13 mm diameter in

metal and up to 20 mm diameter in wood.

CAUTION:

Never use “rotation with hammering” when the drill chuck

assembly is installed on the tool. The drill chuck assem-

bly may be damaged.

Also, the drill chuck will come off when reversing the tool.

Bit diameter (mm)

Dust cup 5 6 – 14.5

Dust cup 9 12 – 16

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita HR 160D in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,23 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Makita HR 160D

Makita HR 160D User Manual - English, German, Dutch, Danish, French, Italian, Norwegian - 17 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita HR 160D Manual

Product: