Manual Makita HM 1214C (page 6 of 32) (English, German, Dutch, Danish, French, Italian, Portuguese, Spanish)

448489

Zoom out

Zoom in

1/32

CAUTION:

• Be careful not to damage the brush holder unit and

carbon brushes especially when installing the rear

cover.

• Do not reuse the six bolts but use new ones in the

reassembling since these bolts are applied with

adhesive.

To maintain product SAFETY and RELIABILITY, repairs,

any other maintenance or adjustment should be

performed by Makita Authorized Service Centers, always

using Makita replacement parts.

ACCESSORIES

CAUTION:

• These accessories or attachments are recommended

for use with your Makita tool specified in this manual.

The use of any other accessories or attachments might

present a risk of injury to persons. Only use accessory

or attachment for its stated purpose.

If you need any assistance for more details regarding

these accessories, ask your local Makita Service Center.

• Bull point (SDS-max)

• Cold chisel (SDS-max)

• Scaling chisel (SDS-max)

• Clay spade (SDS-max)

• Bit grease

• Safety goggles

• Hammer grease

• Plastic carrying case

For European countries only

Noise

ENG102-2

The typical A-weighted noise level determined according

to EN60745:

Sound pressure level (L

): 78 dB (A)

Sound power level (L

): 98 dB (A)

Uncertainty (K): 2.5 dB (A)

Wear ear protection

Vibration

ENG216-1

The vibration total value (tri-axial vector sum) determined

according to EN60745-2-6:

Work mode: chiseling function with side handle

Vibration emission (a

h,CHeq

): 8.0 m/s

Uncertainty (K): 1.5 m/s

EC Declaration of Conformity ENH212-7

We Makita Corporation as the responsible

manufacturer declare that the following Makita

machine(s):

Designation of Machine: Demolition Hammer

Model No./ Type: HM1214C

are of series production and

Conforms to the following European Directives:

2000/14/EC, 98/37/EC until 28th December 2009 and

then with 2006/42/EC from 29th December 2009

And are manufactured in accordance with the following

standards or standardised documents:

EN60745

The technical documentation is kept by our authorised

representative in Europe who is:

Makita International Europe Ltd,

Michigan, Drive, Tongwell,

Milton Keynes, MK15 8JD, England

The conformity assessment procedure required by

Directive 2000/14/EC was in Accordance with annex VIII.

Notified Body:

TÜV Rheinland Product Safety GmbH, identification

no. 0197

Measured Sound Power Level: 98 dB

Guaranteed Sound Power Level: 100 dB

16th January 2009

Tomoyasu Kato

Director

Makita Corporation

3-11-8, Sumiyoshi-cho,

Anjo, Aichi, JAPAN

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita HM 1214C in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita HM 1214C Manual

Product: