599955

Makita HB500 Manual

6
Zoom out
Zoom in
Previous page
1/17
Next page
10
en
11
en
• To power up the maChine, press and release
the red button Fig. 5
• To energiSe the magnet, press and release
the yellow button - the yellow LED will light
Fig. 6.
RECHECK the pilot is still centred on the hole
position - energising the magnet can sometimes
cause the unit to move slightly from the centre
mark, reposition if necessary.
• The magnet will hold on all ferrous materials
from a minimum of 6mm (1/4”) thickness.
STARTING THE CUT
•
alwayS lower the safety guard.
• Start the motor by pressing and releasing
the green button - the green LED will light
Fig. 7.
• Wind the cutter gently down to the surface
of the work and apply light pressure until
the cutter has made the initial groove in the
surface. Increase the pressure until the motor
is loaded Fig. 8.
• Maintain steady pressure throughout the rest
of the cut. Too much pressure will not speed
the cut, it will reduce the life of the cutter and
may cause damage to the motor. If the shavings
become blue add more oil.
startinG the cut
N.B. Safety strap has been omitted from the photo’s for clarity.
Fig. 5
Fig. 6
Fig. 7
Fig. 8
• to stop the motor,
PRESS & RELEASE GREEN BUTTON.
• If the cutter jams in the workpiece,
Stop the
motor
and gently raise the cutter out of the
workpiece before re-starting.
• If the power is interrupted during the cut,
the machine must be reset before the motor
will restart.
• At the end of the cut, the slug will be ejected.
Withdraw the cutter from the work piece and
stop the motor.
• To disengage the magnet, press and release
the yellow button - the magnet will not
disengage immediately, there will be a 3 second
delay before the magnet disengages along with
a continuous beep.
INCORRECT START UP OR SHUT DOWN
SEQUENCE:-
• A single beep will be heard for all operations
carried out in the correct sequence. A
continuous beep will sound for any incorrect
sequence.
• Neither drill nor magnet can be operated until
red power button is activated.
• When the red power button is activated, the
motor will not run until the magnet is activated.
power up the maChine
energiSe the magnet
Start the motor
Start the Cut
N.B. Safety strap has been omitted from the photo’s for clarity.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita HB500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita HB500 in the language / languages: English, Dutch as an attachment in your email.

The manual is 2,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info