599703
5
Zoom out
Zoom in
Previous page
1/64
Next page
5
ENGLISH (Original instructions)
Explanation of general view
SPECIFICATIONS
Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
Specifications may differ from country to country.
Weight according to EPTA-Procedure 01/2003
Symbols
END202-7
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
...... Read instruction manual.
................ DOUBLE INSULATION
...... Wear safety glasses.
................ Only for EU countries
Do not dispose of electric equipment
together with household waste
material!
In observance of European Directive
2012/19/EU on waste electric and
electronic equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible
recycling facility.
Intended use
ENE050-1
The tool is intended for grinding ferrous materials or
deburring castings.
Power supply
ENF002-2
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.
General Power Tool Safety
Warnings GEA010-1
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
STRAIGHT GRINDER SAFETY
WARNINGS
GEB108-3
Safety Warnings Common for Grinding Operation:
1. This power tool is intended to function as a
grinder. Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed
below may result in electric shock, fire and/or serious
injury.
1. Switch trigger
2. Lock lever
3. Hex wrench
4. Hex bolt
5. Hex lock nut
6. Tighten
7. Loosen
8. Wing bolt
9. Support cover
10. Lock nut
11. Grinding wheel
12. Spindle
13. Screwdriver
14. Inner flange
15. Lock nut wrench
16. Hex nut
17. Outer flange (convex type)
18. Outer flange (flat type)
19. Exhaust vent
20. Inhalation vent
21. Handle R
22. Dust cover attachment R
23. Handle L
24. Dust cover attachment L
25. Hook B
26. Hook A
27. Rib A
28. Vent A
29. Vent B
30. Commutator
31. Insulating tip
32. Carbon brush
33. Brush holder cap
Model GS5000 GS6000
Maximum wheel capacity (diameter thickness) 125 mm 20 mm 150 mm 20 mm
Spindle thread M14 or 1/2” (country specific)
No load speed (min
-1
) 5,600
Overall length
With support cover 590 mm 590 mm
Without support cover 588 mm 588 mm
Net weight
With support cover 5.0 kg 5.2 kg
Without support cover 4.9 kg 5.0 kg
Safety class /II
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita GS6000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita GS6000 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info