793637
9
Zoom out
Zoom in
Previous page
1/120
Next page
9ENGLISH
Work mode: disc sanding with normal side grip
h, DS2
2

h, DS2
2
Model GA9070, GA9070Y

h, AG2
2

h, AG2
2
Work mode: disc sanding with normal side grip
h, DS2 or less
2

h, DS2
2
Model GA9071, GA9071Y

h, AG2
2

h, AG2
2
Work mode: disc sanding with normal side grip
h, DS2
2

h, DS2
2
NOTE:


NOTE:

WARNING: The vibration emission during
󰀨
declared value(s) depending on the ways in which
the tool is used especially what kind of workpiece
is processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
󰀨
trigger time).
WARNING:

-
󰀨
EC Declaration of Conformity
For European countries only


SAFETY WARNINGS
General power tool safety warnings
WARNING: Read all safety warnings, instruc-

with this power tool.


Save all warnings and instruc-
tions for future reference.



Grinder safety warnings
Safety Warnings Common for Grinding, Sanding,
󰀨
1.
This power tool is intended to function as a
󰀨
all safety warnings, instructions, illustrations



2.
Operations such as polishing are not recom-
mended to be performed with this power tool.
Operations for which the power tool was not designed

3. -
cally designed and recommended by the tool
manufacturer.

safe operation.
4. The rated speed of the accessory must be at
least equal to the maximum speed marked on
the power tool.

5. The outside diameter and the thickness of your
accessory must be within the capacity rating
of your power tool.

6.
Threaded mounting of accessories must match
the grinder spindle thread. For accessories





7. Do not use a damaged accessory. Before each
use inspect the accessory such as abrasive
wheels for chips and cracks, backing pad for
cracks, tear or excess wear, wire brush for
loose or cracked wires. If power tool or acces-
sory is dropped, inspect for damage or install
an undamaged accessory. After inspecting and
installing an accessory, position yourself and
bystanders away from the plane of the rotating
accessory and run the power tool at maximum
no-load speed for one minute. Damaged acces-

time.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita GA7070 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita GA7070 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 21.54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info