Manual Makita G4300L (page 5 of 24) (English)

599749

Zoom out

Zoom in

1/24

MAINTENANCE SCHEDULE

The engine owner is responsible for having all scheduled inspection and maintenance services performed at the intervals specified in the

2003 and later Owner's Manual and to retain records of these services as having been performed. These records should be transferred to

each subsequent owner of the engine. MAKITA cannot deny a claim solely because there are no records of scheduled maintenance,

however, a warranty claim may be denied if the failure to perform the scheduled maintenance and inspection resulted in the failure of a

warranted emission-related part.

As a minimum, the engine owner is responsible for the scheduled inspection and maintenance described below which are based on the

procedures described in the Owner's Manual.

PROCEDURE INTERVAL

1) Change engine oil : Initial 20 hours and every 100 hours afterward

2) Clean air cleaner (element) : Every 50 hours

3) Replace air cleaner element : Every 200 hours

4) Clean and adjust spark plug and electrodes : Every 200 hours

Note: More frequent maintenance may be necessary under dusty, dirty or severe conditions.

REPAIR AND REPLACEMENT OF EMISSION-RELATED PARTS

It is recommended that only engine replacement parts which have been authorized and approved by MAKITA should be used in the

performance of any warranty maintenance or repairs of emission-related parts. These replacement parts will be provided at no charge if the

part is still under warranty.

HOW TO FILE A WARRANTY CLAIM AND WHERE TO GET WARRANTY SERVICES

Contact the nearest Makita Factory Service Center Manager to determine the appropriate location where the required warranty services are

to be performed. A list of the Factory Service Center locations and phone numbers are provided below for your convenience.

41850 Christy St.

Fremont, CA 94538-5107

(510)657-9881

14930 Northam St.

La Mirada, CA 90638-5753

(714)522-8088

1970 Fulton Ave.

Sacramento, CA 95825

(916)482-5197

7674 Clairemont Mesa Blvd.

San Diego, CA 92111

(858)278-4471

16735 Saticoy St.,Ste. 105

Van Nuys, CA 91406

(818)782-2440

G2800L(US)_GU1843 2004.2.6 1:14 PM ページ05

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita G4300L in the language / languages: English as an attachment in your email.

The manual is 0,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Makita G4300L

Makita G4300L User Manual - German - 19 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita G4300L Manual

Product: