Manual Makita G3200L (page 15 of 24) (English)

599748

Zoom out

Zoom in

1/24

Some appliances need a "surge" of energy when starting.

This means that the amount of electrical power

needed to start the appliance may exceed the amount needed to

maintain its use.

Electrical appliances and tools normally come with a label indicating voltage, cycles / Hz, amperage (amps)

and electrical power needed to run the appliance or tool.

Check with your nearest dealer or service center with questions regarding power surge of certain appliances

or power tools.

Electrical loads such as incandescent lamps and hot plates require the same wattage to start as is

needed to maintain use.

Loads such as fluorescent lamps require 1.2

to 2 times the indicated wattage during start-up.

Loads for mercury lamps require 2 to 3 times the indicated wattage during start-up.

Electrical motors require a large starting current. Power requirements depend on the type of motor and

its use. Once enough "surge" is attained to start the motor, the appliance will require only 50% to 30%

of the wattage to continue running.

Most electrical tools require 1.2 to 3 times their wattage for running under load during use. For example,

a 5000 watt generator can power a 1800 to 4000 watt electrical tool.

Loads such as submersible pumps and air compressors require a very large force to start. They need 3

to 5 times the normal running wattage in order to start.

For example, a 5000 watt generator would

only be able to drive a 1000 to 1700 watt pump.

5. WATTAGE INFORMATION

To determine the total wattage required to run a particular electrical appliance or tool, multiply the voltage

figure of the appliance/tool by the amperage (amps) figure of same. The voltage and amperage (amps)

information can be found on a name plate which is normally attached to electrical appliances and tools.

NOTE

The following wattage chart is general guide only. Refer to your specific appliance for

correct wattage.

Applications

Applicable Wattage (W)

G4300L

approx. 3700

approx. 1900

G2800L G3200L

approx. 1600

60Hz

approx. 800

Incandescent lamp, Heater approx. 2400 approx. 2700

Fluorescent lamp, Electric tool approx. 1200 approx. 1400

Mercury lamp approx. 800 approx. 1000

Pump, Compressor approx. 500 approx. 550

G2800L(US)_GU1843 2004.2.6 1:14 PM ページ9

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita G3200L in the language / languages: English as an attachment in your email.

The manual is 0,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Makita G3200L

Makita G3200L User Manual - German - 19 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita G3200L Manual

Product: