690621
11
Zoom out
Zoom in
Previous page
1/32
Next page
7
2. PERIODIC INSPECTION
Periodic maintenance is vital to the safe and efcient
operation of your pump.
Check the table below for periodic maintenance
intervals.
The below chart is based on the normal product
operation schedule.
CAUTION
Replace rubber pipes for fuel passage every
two years. If fuel leakage is found, replace
the pipe immediately.
Periodic Maintenance Schedule table
Maintenance Items Every 8 hours
(Daily)
Every 50 hours
(Weekly)
Every 200 hours
(Monthly)
Every
300 hours
Every
500 hours
Every
1000 hours
CLEAN PUMP SET AND CHECK BOLTS
AND NUTS
(Daily)
CHECK FOR LEAKAGE FROM HOSES
AND FITTING
(Daily)
CHECK AND REFILL ENGINE OIL
(Rell daily up to upper level)
CHANGE ENGINE OIL
(Initial
20 hours)
(Every
100 hours)
CLEAN SPARK PLUG
(Every
100 hours)
CLEAN AIR CLEANER
REMOVE THE PUMP CASING AND
CLEAN
CLEAN FUEL STRAINER
CLEAN AND ADJUST SPARK PLUG
AND ELECTRODES
CHECK AND ADJUST VALVE
CLEARANCE
REMOVE CARBON FROM CYLINDER
HEAD
CLEAN AND ADJUST CARBURETOR
REPLACE FUEL HOSE
(Every
2 years)
OVERHAUL ENGINE IF NECESSARY
3. INSPECTING THE SPARK PLUG
(See Fig. - )
(1) Clean off carbon deposits on the spark plug electrode using a plug cleaner or wire brush.
(2) Check electrode gap. The gap should be 0.6 mm to 0.7 mm (0.02 inch.-0.03 inch.).
Adjust the gap, if necessary, by carefully bending the side electrode.
Recommended Spark Plug:
E6RC (TORCH) or BR-6HS (NGK)
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita EW3050H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita EW3050H in the language / languages: All languages as an attachment in your email.

The manual is 8,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info