Manual Makita ER2550LH (page 15 of 184) (English, German, Dutch, Danish, French, Italian, Portuguese, Spanish)

599901

Zoom out

Zoom in

1/184

CLEANING OF AIR CLEANER

DANGER: INFLAMMABLES STRICTLY PROHIBITED

Interval of Cleaning and Inspection: Daily (every 10 operating hours)

Turn the choke lever to the full close side, and keep the carburetor off from –

dust or dirt.

Remove the air cleaner cover-ﬁxing bolts. –

Pull the cover lower side and detach the air cleaner cover. –

If oil adheres to the element (sponge), squeeze it ﬁrmly. –

For heavy contamination: –

1) Remove the element (sponge), immerse it in warm water or in waterdiluted

neutral detergent, and dry it completely.

2) Clean the element (felt) with gasoline, and dry it completely.

Before attaching the element, be sure to dry it completely. Insufﬁcient drying –

of the element may lead to difﬁcult startup.

Wipe out with waste cloth, oil adhering around the air cleaner cover and plate –

breather.

Immediately after cleaning is ﬁnished, attach the cleaner cover and tighten it –

with ﬁxing bolts. (In remounting, ﬁrst place the upper claw, and then the lower

claw.)

Points in Handling Air Cleaner Element

Clean the element several times a day, if excessive dust adheres to it. –

If operation continues with the element remaining not cleared of oil, oil in –

the air cleaner may fall outside, resulting in oil contamination.

Plate

Element (sponge)

Air cleaner cover

Fixing bolt

Element (felt)

Pick this part and remove

the element (felt).

Breather part

POINTS ON OIL

Never discard replaced engine oil in garbage, earth or sewage ditch. Disposal of oil is regulated by law. In disposal, always follow the –

relevant laws and regulations. For any points remaining unknown, contact Authorized Service Agent.

Oil will deteriorate even when it is kept unused. Perform inspection and replacement at regular intervals (replace with new oil every –

6 months).

4) Detach the oil gauge, and drain oil, tilting the main unit toward the oil reﬁll

port.

Drain oil in a container for orderly disposal.

5) Keep the engine level, and feed new oil up to the edge of the oil reﬁll port.

In reﬁll, use a lubricant reﬁll container.

6) After reﬁll, securely tighten the oil gauge. Insufﬁcient tightening of the oil

gauge will lead to oil leakage.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita ER2550LH in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 4,13 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita ER2550LH Manual

Product: