599900

Makita EPH1000 Manual

24
Zoom out
Zoom in
Previous page
1/38
Next page
23
1. Remove spark plug, and with its metal part touching the cylinderhead, try to
build sparks in the spark plug.
2. If nospark flies between the electrodes of the sparkplug, replace it.
Do sparks fly in
spark plug?
3. If still no spark flies, have a qualified service shop check the engine.
1. Check the compression by pulling starter handle slowly.
If compression is low, check the tightness of the spark plugs and other
members, and tighten all loose members.
Is compression
sufficient?
2. If compression is still low, have a qualified service shop check the engine.
1. Set combination control lever to “CHOKE”, pull the starter handle several
times and remove spark plug. If the end of the spark plug is wet with fuel,
fuel suction is in order.
2. If fuel is not sucked properly, check the carburetor entry and fuel strainer
entry for possible blockage.
Starting failure
Is fuel sucked into
the cylinder?
3. When fuel is properly sucked and still the engine can not be started, try with
new fuel.
PROBLEMES ET REMEDES POUR LA PARTIE MOTEUR
1. Retirer la bougie et vérifier si une étincelle se produit au niveau des
électrodes.
2. S’il n’y a pas d’étincelle, remplacer ladite bougie.
3. S’il y a une étincelle, faire vérifier le moteur par le service après-vente du
Étincelles à la
bougie d’allumage?
revendeur.
1. Vérifier la compression en tirant doucement la poignée du lanceur. Si la
compression est faible, vérifier le serrage de la bougie d’allumage et autres
Défaut de
démarrage
éléments connexes. Resserrer toutes les pièces qui seraient desserrées.
2. Si la compression reste faible, faire vérifier le moteur par le service après-
Compression suffi-
sante?
vente du revendeur.
1. Mettre le levier d’accélérateur sur la position starter "CHOKE", tirer plusieurs
fois la poignée du lanceur. Puis retirer la bougie d’allumage. Si son
extrémité est mouillée, cela signifie que l’arrivée d’essence est correcte.
2. Si l’arrivée d’essence est incorrecte, vérifier l’entrée du carburateur et
l’entrée du filtre a essence où il peut y avoir blocage.
3. Si l’arrivée d’essence est correcte mais que le moteur ne démarre toujours
Alimentation du
carburant au
cylindre?
pas, essayer un nouveau carburant.
TROUBLESHOOTING PROCEDURES
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita EPH1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita EPH1000 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info