Manual Makita EM4350UH (page 23 of 54) (English, German)

599893

Zoom out

Zoom in

1/54

5) Set the engine level, and gradually ﬁll up to upper limit mark with new oil.

6) After ﬁlling, tightly secure oil cap, so that it will not loosen and cause leaks.

If oil cap is not tightly secured, it may leak.

CLEANING OF AIR CLEANER

WARNING: Shut off the engine, keep away from open ﬂames

and do not smoke.

Interval of Cleaning and Inspection: Daily (every 10 operating hours)

Turn the choke lever to the full close side, and keep the carburetor off from –

dust or dirt.

Removing air cleaner cover

Release the hook on the air cleaner cover by pressing down the loop on the –

plate.

Loosen ﬁxing bolt. –

Pull and remove the air cleaner cover. –

Cleaning element

Remove the elements and tap them to remove dirt. –

For heavy contamination: –

1) Remove the element (sponge), immerse it in warm water or in water-

diluted neutral detergent, and dry it completely. Do not squeeze or rub it

when washing.

2) Clean the element (paper) by tapping it gently. If you can use an air blow

gun, blow the compressed air onto the inside of the element (paper). Do

not wash the element (paper).

Before attaching the element (sponge), be sure to dry it completely. –

Insufﬁcient drying of the element (sponge) may lead to difﬁcult start-up.

Wipe out oil adhering around the air cleaner cover and separator plate with –

waste cloth.

Attaching air cleaner cover

Fit the element (sponge) and element (paper). Insert the element (sponge) all –

the way into the air cleaner cover.

Insert the side hook onto the air cleaner cover as illustrated, and push the –

lower part of the air cleaner cover until it clicks so that the hook sits into the

loop properly. And then tighten the air cleaner cover with ﬁxing bolt.

NOTICE:

Clean the elements several times a day, if excessive dust adheres to it. –

Dirty elements reduce engine power and make starting engine difﬁcult.

Remove oil on the elements. If operation continues with the elements –

remaining not cleared of oil, oil in the air cleaner may fall outside, resulting

in contamination of the environment.

Do not put the elements on the ground or dirty place. Otherwise they pick –

up dirt or debris and it may damage the engine.

Never use fuel for cleaning the elements. Fuel may damage them. –

Plate

Element (sponge)

Air cleaner cover

Element (sponge)

Separator plate

Element (paper)

Loop

Fixing bolt

POINTS ON OIL

Never discard replaced engine oil in garbage, earth or sewage ditch. –

Disposal of oil is regulated by law. In disposal, always follow the relevant

laws and regulations. For any points remaining unknown, contact

Authorized Service Agent.

Oil will deteriorate even when it is kept unused. Perform inspection and –

replacement at regular intervals (replace with new oil every 6 months).

Side hook

Hook

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita EM4350UH in the language / languages: English, German as an attachment in your email.

The manual is 2,51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Makita EM4350UH

Makita EM4350UH User Manual - English, Dutch - 54 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita EM4350UH Manual

Product: