599894
23
Zoom out
Zoom in
Previous page
1/54
Next page
23
5) Set the engine level, and gradually ll up to upper limit mark with new oil.
6) After lling, tightly secure oil cap, so that it will not loosen and cause leaks.
If oil cap is not tightly secured, it may leak.
CLEANING OF AIR CLEANER
WARNING: Shut off the engine, keep away from open ames
and do not smoke.
Interval of Cleaning and Inspection: Daily (every 10 operating hours)
Turn the choke lever to the full close side, and keep the carburetor off from
dust or dirt.
Removing air cleaner cover
Release the hook on the air cleaner cover by pressing down the loop on the
plate.
Loosen xing bolt.
Pull and remove the air cleaner cover.
Cleaning element
Remove the elements and tap them to remove dirt.
For heavy contamination:
1) Remove the element (sponge), immerse it in warm water or in water-
diluted neutral detergent, and dry it completely. Do not squeeze or rub it
when washing.
2) Clean the element (paper) by tapping it gently. If you can use an air blow
gun, blow the compressed air onto the inside of the element (paper). Do
not wash the element (paper).
Before attaching the element (sponge), be sure to dry it completely.
Insufcient drying of the element (sponge) may lead to difcult start-up.
Wipe out oil adhering around the air cleaner cover and separator plate with
waste cloth.
Attaching air cleaner cover
Fit the element (sponge) and element (paper). Insert the element (sponge) all
the way into the air cleaner cover.
Insert the side hook onto the air cleaner cover as illustrated, and push the
lower part of the air cleaner cover until it clicks so that the hook sits into the
loop properly. And then tighten the air cleaner cover with xing bolt.
NOTICE:
Clean the elements several times a day, if excessive dust adheres to it.
Dirty elements reduce engine power and make starting engine difcult.
Remove oil on the elements. If operation continues with the elements
remaining not cleared of oil, oil in the air cleaner may fall outside, resulting
in contamination of the environment.
Do not put the elements on the ground or dirty place. Otherwise they pick
up dirt or debris and it may damage the engine.
Never use fuel for cleaning the elements. Fuel may damage them.
Plate
Element (sponge)
Air cleaner cover
Air cleaner cover
Element (sponge)
Separator plate
Element (paper)
Loop
Fixing bolt
POINTS ON OIL
Never discard replaced engine oil in garbage, earth or sewage ditch.
Disposal of oil is regulated by law. In disposal, always follow the relevant
laws and regulations. For any points remaining unknown, contact
Authorized Service Agent.
Oil will deteriorate even when it is kept unused. Perform inspection and
replacement at regular intervals (replace with new oil every 6 months).
Side hook
Hook
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita EM4350LH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita EM4350LH in the language / languages: English, Dutch as an attachment in your email.

The manual is 9,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Makita EM4350LH

Makita EM4350LH User Manual - English, German - 54 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info