Manual Makita EM2653LHN (page 25 of 84) (English, Portuguese, Spanish)

690574

Zoom out

Zoom in

1/84

(For Bump & Feed type)

First, stop the engine.

Press on the one side of housing latch (1) inward to unhook. Perform the same

procedure to the other side of the latch to lift off the cover (2). After removing the

cover, take out the spool inside.

Hook the center of new nylon cord into the notch in the center of the spool (1),

with one end of the cord extending about 80 mm (3 - 1/8”) more than the other.

Thenwindbothendsrmlyaroundthespoolinthedirectionoftheheadrotation

(left-hand direction indicated by LH on the side of the spool).

Wind all but about 100 mm (3 - 15/16”) of the cords, leaving the ends

temporarily hooked through a notch on the side of the spool.

Mount the spool in the housing so that the grooves and protrusions on the

spool match up with those in the housing. Keep the side with letters on the

spool visible on the top. Now, unhook the ends of the cord from their temporary

position and feed the cords through the eyelets to come out of the housing.

Align the protrusion on the underside of the cover with the slots of the eyelets.

Thenpushcoverrmlyontothehousingtosecureit.

100 mm

(3-15/16”)

80 mm (3-1/8”)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita EM2653LHN in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 17,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita EM2653LHN Manual

Product: