Manual Makita EM2653LHN (page 17 of 84) (English, Portuguese, Spanish)

690574

Zoom out

Zoom in

1/84

Note: In case of excessive fuel intake, remove the spark plug and pull the starter handle slowly to remove excess fuel. Also, dry the electrode

section of the spark plug.

Caution during operation:

If the throttle lever is opened fully in a no-load operation, the engine rotation is increased to 10,000 min

-1

or more. Never operate the engine at a

higher speed than required and at an approximate speed of 6,000 - 8,500 min

-1

B: Startup after warm-up operation

1) Push the primer pump repeatedly.

2) Keep the throttle lever at the idling position.

3) Pull the recoil starter strongly.

4) Ifitisdifculttostarttheengine,openthethrottlebyabout1/3.

Pay attention to the cutter blade which may rotate.

At times, such as winter, when starting the engine

is difcult

Operate choke lever with the following procedure when starting engine.

● Afterimplementingstartupsteps1)to3),setchokelevertotheCLOSE

position.

● Implementstartupstep4)andstartengine.

● Onceenginestarts,setchokelevertotheOPENposition.

● Implementstartupstep5)andcompletewarmup.

CAUTION: If a bang (explosive sound) is heard and the engine stops, or the

just-startedenginestallsbeforethechokeleverisoperated,return

the choke lever to the OPEN position, and pull the starter knob a

few times again to start the engine.

CAUTION: If the choke lever is left in the CLOSE position, and the starter knob

merely pulled repeatedly, to much fuel will be sucked in, and the

enginewillbecomedifculttostart.

OPEN

Stopping

1) Release the throttle lever (1) fully, and when the engine rpm has lowered, set

the I-O switch (2) to STOP the engine will now stop.

2) Be aware that the cutting head may not stop immediately and allow it to slow

down fully.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita EM2653LHN in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 17,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita EM2653LHN Manual

Product: