Manual Makita ELM4121 (page 13 of 252) (All languages)

690891

Zoom out

Zoom in

1/252

13 ENGLISH

37. Be careful during adjustment of the mower

to prevent entrapment of the ngers between

moving blades and xed parts of the mower.

38. Mow across the face of slopes, never up and

down. Exercise extreme caution when chang-

ing direction on slopes. Do not mow exces-

sively steep slopes.

39. Do not wash with a hose; avoid getting water

in motor and electrical connections.

40. Check the blade mounting bolt at frequent

intervals for proper tightness.

41. Keep all nuts, bolts, and screws tight to

be sure the equipment is in safe working

condition.

42. Take care as rotating one blade can cause

other blades to rotate.

43. Always allow the mower to cool down before

storing.

44. When servicing the blades be aware that, even

though the power source is switched off, the

blades can still be moved.

45. Replace worn or damaged parts for safety.

Use only genuine replacement parts and

accessories.

46. Have your power tool serviced by a qualied

repair person using only identical replacement

parts.Thiswillensurethatthesafetyofthepower

tool is maintained.

47. Follow instruction for lubricating and chang-

ing accessories.

48. Keep handles dry, clean and free from oil and

grease.

49. Check to make sure that the voltage and fre-

quency of the power supply correspond to the

specications given on the identication plate.

We recommend the use of a residual-current-op-

erated circuit breaker (ground-fault circuit inter-

rupter) with a tripping current of 30 mA or less, or

an earth leakage current protector.

50. This machine can be used by children aged

from 8 years and above and persons with

reduced physical, sensory or mental capabil-

ities or lack of experience and knowledge if

they have been given supervision or instruc-

tion concerning use of the machine in a safe

way and understand the hazards involved.

Cleaning and user maintenance shall not be

made by children without supervision.

Residual risks

Evenifyouareoperatingthisproductinaccordance

withallthesafetyrequirements,potentialrisksofinjury

anddamageremain.Thefollowingdangerscanarisein

connection with the structure and design of this product.

1. Healthdefectsresultingfromvibrationemission

iftheproductisbeingusedoverlongperiodsof

timeornotadequatelymanagedandproperly

maintained.

2. Injuriesanddamagetopropertyduetobroken

application tools or the sudden impact of hidden

objectsduringuse.

3. Dangerofinjuryandpropertydamagecausedby

yingobjects.

WARNING: This product produces an elec-

tromagnetic eld during operation. This eld may

under some circumstances interfere with active

or passive medical implants. To reduce the risk

of serious or fatal injury, we recommend persons

with medical implants to consult their doctor and

the medical implant manufacturer before operat-

ing this product.

SAVE THESE INSTRUCTIONS.

WARNING: DO NOT let comfort or familiarity

with product (gained from repeated use) replace

strict adherence to safety rules for the subject

product.

MISUSE or failure to follow the safety rules stated

in this instruction manual may cause serious

personal injury.

ASSEMBLY

CAUTION: Always be sure that the tool is

switched off and unplugged before carrying out

any work on the tool.

Assembling the handle

1. Unload the upper handle from the main unit of the

machine.

►Fig.1: 1. Upper handle

2. Loosen the thumb nuts.

►Fig.2: 1.Thumbnut

3. Widen the handle outside a little, then raise the

handle, then insert the protrusions of the handle into the

holes, and then tighten the thumb nuts.

►Fig.3: 1. Handle 2. Protrusion 3. Hole 4.Thumbnut

4. Attachtheupperhandlebyinsertingthelevers

from the outside of the handle, and then tighten the nuts

with the wrench to secure the handle.

►Fig.4: 1.Lever2. Nut

5. Secure the cords with the clamps as shown in the

gure.

►Fig.5: 1. Clamp

Installing the grass basket

1. Attach the pipes of the grass basket to the frame.

►Fig.6: 1. Pipe 2. Frame

2. Opentherearcover.

►Fig.7: 1.Rearcover

3. Insert the grass basket from the front side through

the inside of the handle, and then hook the grass basket

onto the rear side of the machine.

►Fig.8: 1. Grass basket

►Fig.9

Toremovethegrassbasket,performtheinstallation

procedureinreverse.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita ELM4121 in the language / languages: All languages as an attachment in your email.

The manual is 41,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita ELM4121 Manual

Product: