Manual Makita ELM3720 (page 15 of 232) (All languages)

690693

Zoom out

Zoom in

1/232

15 ENGLISH

For ELM4120:

Set the mowing height to "2".

►Fig.40: 1.Adjustinglever

Loosen the thumb nuts while holding the handle, then

widen the handle outside a little, and then fold the handle.

►Fig.41: 1.Thumbnut2. Handle 3.Mark4. Arrow

CAUTION: When folding the handle, be care-

ful not to pinch your hand or ngers.

NOTE:Makesurethatthearrowindicatesthemark

at the most front position.

5. Tightenthethumbnuts.

►Fig.42: 1.Thumbnut

6. Placethemachineasshowninthegure.

►Fig.43

CAUTION: Be sure to store this machine

indoors and place it on a at surface. Otherwise,

themachinemayfallandcauseaninjury.

You can also store the machine by folding the handle.

CAUTION: Before opening the levers, hold

the upper handle rmly. Otherwise, the handle

may fall and cause an injury.

1. Opentheleverswhileholdingtheupperhandle.

►Fig.44: 1.Lever

2. Fold the upper handle.

►Fig.45: 1. Upper handle

Replacing the mower blade

CAUTION: Do not use any wrench other than

the standard hex wrench when replacing the

mower blade. Using a different wrench may lead to

over-tighteningorlooseness,whichmaycauseinjury.

1. Unplug the extension cord and stand up the

machine. (Refer to the instructions for storing.)

2. Insert the pin into the hole, and then hold the han-

dle with one hand and loosen the bolt with the wrench

counterclockwise.

►Fig.46: 1. Blade 2. Wrench 3. Pin

3. Removethemowerblade.

For ELM3320

Removethebolt,washer,mowerblade,andbracketin

order.

►Fig.47: 1. Bracket 2.Mowerblade3. Washer 4. Bolt

For ELM3720/ELM4120

Removethebolt,washer,mowerblade,bracket,and

spacer in order.

►Fig.48: 1. Spacer 2. Bracket 3.Mowerblade

4. Washer 5. Bolt

4. Attach a new mower blade, then insert the pin into

the hole, and then hold the handle with one hand and

tightentheboltwiththewrenchclockwisermly.

►Fig.49: 1.Mowerblade2. Wrench 3. Pin

Extension cord

You should only use extension cords for outdoor use,

PVC or rubber cord ordinary duty with a cross sectional

area not less than 1.5 mm

Before and during use, check the supply and extension

cords for damage. Do not use the appliance if the cord

is damaged or worn. Keep extension cord away from

cutting elements. If the cord is damaged during use,

disconnect the cord from the supply immediately. Do not

touch the cord before disconnecting the supply.

OPTIONAL

ACCESSORIES

CAUTION: These accessories or attachments

are recommended for use with your Makita tool

specied in this manual.Theuseofanyother

accessories or attachments might present a risk of

injurytopersons.Onlyuseaccessoryorattachment

for its stated purpose.

If you need any assistance for more details regard-

ingtheseaccessories,askyourlocalMakitaService

Center.

• Mowerblade

NOTE: Some items in the list may be included in the

toolpackageasstandardaccessories.Theymay

differ from country to country.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita ELM3720 in the language / languages: All languages as an attachment in your email.

The manual is 42,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita ELM3720 Manual

Product: