599871

Makita EG4550A Manual

12
Zoom out
Zoom in
Previous page
1/112
Next page
12
WARNING:
Failure to properly follow maintenance instructions
and precautions can cause severe personal injury or
loss of life.
Always follow the procedures and precautions in the
instruction manual.
Safety Precautions
• Make sure the engine is off before beginning any
maintenance or repairs. This will eliminate several
potential hazards:
- Carbon monoxide poisoning from engine
exhaust.
Operate outside away from open windows or
doors.
- Burns from hot parts.
Let the engine and exhaust system cool before
touching.
- Injury from moving parts.
Do not run the engine unless instructed to do so.
• Read the instructions before you operate the generator,
and make sure you understand the instructions and
have the tools and skills required.
• To reduce the possibility of fire or explosion, be careful
when working around gasoline. Use only a non-
flammable solvent, not gasoline, to clean parts. Keep
cigarettes, sparks, and flames away from all fuel-
related parts.
Remember that your servicing dealer knows your
generator best and is fully equipped to maintain and repair
it.
To ensure the best quality and reliability, use only new,
genuine Makita parts or their equivalents for repair or
replacement.
Maintenance Schedule
*1: Service more frequently when using the generator in dusty, dirty or severe environments.
*2: Unless the owner has the proper tools and is mechanically proficient, this item should be serviced by an authorized
Makita generator dealer. Refer to the Makita Shop Manual.
*3: For commercial use, hours of operation should be logged to determine proper maintenance intervals.
Failure to follow this maintenance schedule may result in non-warrantable malfunctions.
Engine Oil Change (Fig. 15)
Drain the oil while the engine is warm to assure quick and
complete draining.
1. Place a suitable container below the engine to catch
the oil.
2. Drain the oil by removing the oil drain plug, the sealing
washer, and the oil filler cap/dipstick.
3. Reinstall the oil drain plug and a new sealing washer
and firmly tighten the plug.
4. Refill with the recommended oil and check the oil
level.
Wash your hands with soap and water after handling used
oil.
NOTICE:
Improper disposal of used engine oil can be hazardous to
the environment. Before changing the oil, check for a
suitable way to dispose of the used oil. Do not discard it in
a trash bin, pour it down a drain, or dump it on the ground.
Your local zoning or environmental regulations will give
you more detailed instructions on proper disposal.
Air Cleaner Service (Fig. 16 & Fig. 17)
A dirty air cleaner will restrict air flow to the carburetor. To
prevent carburetor malfunction, clean the air cleaner
regularly. Clean more frequently when operating the
generator in extremely dusty areas.
REGULAR SERVICE PERIOD
*3
Each use
First month
or 20 hrs.
Every 3
months or
50 hrs.
Every 6
months or
100 hrs.
Every year
or 300 hrs.
MAINTENANCE ITEMS
Perform at every indicated month or
operating hour interval, whichever
comes first.
Engine oil Check level
c
Change
cc
Air Cleaner Check
c
Clean
c
*1
Sediment cup Clean
c
Spark plug Check-adjust
c
Replace
c
Spark arrester Clean
cc
*2
Idle speed Check-adjust
Valve clearance Check-adjust
c
*2
Combustion
chamber
Clean
After every 500 hrs.
*2
Fuel tank and
filter
Clean
c
*2
Fuel tube Check Every 2 years (Replace if necessary)
*2
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita EG4550A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita EG4550A in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info